SOLD PCB Enclosures
- Thread starter FrancoB
- Start date
Mark your items as sold
FrancoB
Champion
Ah, I see what you mean with the Hirose connector on the top board:
Well, one could make an extension and mount the end extension piece flush with the top piece of acrylic. I just happen to have both male and female parts and contacts too
Well, one could make an extension and mount the end extension piece flush with the top piece of acrylic. I just happen to have both male and female parts and contacts too
FrancoB
Champion
It could be a tricky one but happy to have a look. Fill in the form if you want to move forward.
I'm just finishing up the next lot and they're due out the door shortly.
Cutting the enclosures is the quick part, everything else takes forever
There has been some interesting colour combinations, I'm looking forward to seeing some of these built up.
I had requests for Battle Garegga so I managed to get a few made in this lot. Battle Garegga doesn't have a heatsink on the audio amp but I spoke to my buddy and he requested a ventilation grill.... so I present to you... the Battle Garegga Burger Grill™
I've also applied the BGBG™ to Esp Ra. De. enclosures as they have a similar amp setup.
I'm working on a few other enclosures at the moment:
- Golden Axe: The Revenge of Death Adder
- System 16 (Multi)
- M92 Multi
- Prehistoric Isle
- Cyvern (Kaneko Super Nova System)
- CPS1 (Hyper Fighting - I need to look at other board configurations too)
- Penguin Brothers
- Gun Frontier
I'm hoping to get this lot developed in time for my next materials run which is in a couple of weeks. If you need anything kindly fill in the order form, thanks!
I'm just finishing up the next lot and they're due out the door shortly.
Cutting the enclosures is the quick part, everything else takes forever
There has been some interesting colour combinations, I'm looking forward to seeing some of these built up.
I had requests for Battle Garegga so I managed to get a few made in this lot. Battle Garegga doesn't have a heatsink on the audio amp but I spoke to my buddy and he requested a ventilation grill.... so I present to you... the Battle Garegga Burger Grill™
I've also applied the BGBG™ to Esp Ra. De. enclosures as they have a similar amp setup.
I'm working on a few other enclosures at the moment:
- Golden Axe: The Revenge of Death Adder
- System 16 (Multi)
- M92 Multi
- Prehistoric Isle
- Cyvern (Kaneko Super Nova System)
- CPS1 (Hyper Fighting - I need to look at other board configurations too)
- Penguin Brothers
- Gun Frontier
I'm hoping to get this lot developed in time for my next materials run which is in a couple of weeks. If you need anything kindly fill in the order form, thanks!
spacejockey
Professional
Hi there ! Would love to get a quote for the Crime Fighters 2 and the Demon Front PCB enclosures (in a grey color) since they already exist.
And would also love to know if enclosures for the Irem M72 multi and the Psikyo SH2 multi would be possible to do and if so, what would be their price.
And would also love to know if enclosures for the Irem M72 multi and the Psikyo SH2 multi would be possible to do and if so, what would be their price.
Ziggy Cheetos Dust
Champion
Excited for mine to arrive. It all looks great. I suspect there are several other PGM boards that are the same as Demon Front as well. It’s great to see someone with a Penguin Brothers out there too.
ImportantBet
Grand Master
I'm the one who commissioned for a Taito F2 (Gun Frontier) board above. It's at a friend's place right now so I won't be able to provide dimensions for FrancoB
Does anyone have one on hand and could get measurements for him here?
Does anyone have one on hand and could get measurements for him here?
Last edited:
JohnRambo'sKnife
Champion
Can measure tomorrow (if I can find it).
FrancoB
Champion
Thanks for all of the interest but I'm putting these on hold for the forseeable future. I've closed the form for now. If I happen to open it up again I'll post here and email the last people interested.