Recent content by Funhouse1971

Ah ok...well I have just solder bridged across the pins on the bottom of the board no loose headers connectors to worry about now

Thanks for the fix, added 2 PC jumpers to both sets of pins and working fine now :thumbsup:

Thanks that connector is missing off of mine but don't recall ever having any issues coining it up, unless of course connector has dropped off the board and haven't realised. I make a connector up to bridge 1-2 and 3-4 and report back.

So just to add just gone into Rastan's test menu and when I press coin the coin switch status is showing as being activated but as previously stated the game itself doesn't want to register any coin input

Finally got my kit installed tonight and have a small issue where Rainbow Islands coins up fine but Rastan refuses to coin up...any ideas what the issue could be?

Thanks Darksoft :thumbup:

Got my kit today, many thanks! :thumbsup:, I've sussed out mostly from the pictures you posted the install layout of the kit fitted on a Rastan board but does the GAL16V8B supplied go in this location on the board I've highlighted in yellow on the image below. Both existing PAL chips are...

Just checked my games stash and have a Rastan ready for the convert...so count me in :thumbsup:

Thanks guys, I have 2 Namco System 1 boards, a Pacmania and Splatterhouse so good to know I can keep these boards running into the future :thumbup:

I did say the sockets were rubbish, although handy for when you want to replace them ;). You may have been lucky not to have completely removed the socket from the pins as I found it nigh on impossible to get them to sit back over the pins properly when completely removed from the board. If...

Have you reseated every socketed chip as these Gauntlet boards have the crappy single wipe sockets and the pins in them suffer from age related metal fatigue and end up breaking. I had a Gauntlet board which was perfectly fine when put away for storage and a year later I plugged it in prior to...

Put my order in for one of these tonight :D, just waiting for the DE10 Nano to come back into stock in the UK

Thanks! :thumbup:

Thanks for this Darksoft. Can you confirm what the name of the folder should be in the 'games' folder?. So far I have just extracted the original zip so the folder is called XenoCrisis_NG_DarksoftMulti_v1_0_0 then I next tried 'XenoCrisis' and also tried 'Xeno Crisis'. The Menu has been...

Welcome to the forum Dan I'm also based in UK too