Recent content by magicman

I will have to check the revision of the my HOTD4, not sure of it. The 7800GS I bought had this in the listing from the seller: " “"Please make a note: SEGA Consoles or Wangan / Wangan Console"” I don't remember there ever being any Wangan Midnight related game on the Lindbergh... it was on...

The card that was pulled which failed is a 6800GT, I said 6800GS earlier in the thread that was a mistake. I bought a 7800GS card off ebay yesterday, waiting for it to arrive. I'm expecting it to work in HOTD4 without needs to update or flash anything, am I correct?

What do you mean narrower memory bus, the Yellow versions 6800GS had a 128bit memory bus vs the 7600GS has a 256bit All the specs of the 7600GS appear to be higher/better than the 6800GS ? Am I missing something? Is there anything in the OS that specifically is trying to load the 6800GS?

Do you happen to know why?

So our House of the Dead 4 machine stopped working, GPU died. We picked up a 7600GS off ebay out of China, says it came out of a Lindbergh Red. After installing and booting up, the game stays at a black screen after the loading bar. In other words, the only image you see is from the first...

Thank you for that offer, this sounds interesting and I would take you up on that, but the shipping right now is what is really in the way -- I agree, it's been very expensive. Let me consider it over some time and maybe sort out some of my other cabinets in the meantime and I will get back to you.

Are you Mo? If so, we emailed back in March about a Sega Model 2A game board for VF2, you shipped it to me with a missing rom chip and said you were going to ship it to me. There was even a thread about it here...

I've gotten as far as finding out that the panel is a IRTouch Systems K22 model, EOL years ago. K22D03MR-02 to be exact. I found it on their website through the wayback internet portal, last mention was around 2015. I reached out to Konami, they referred me to Betson Enterprises in NJ...

Does this work on all TTX4 games that do nesica network check ? Does it work on Street Fighter 5 & 6

There is a setting in the test menu for 'in-store only', have you tried enabling this? If not, please try and let me know if this gets you past the arcade network verification screen. I'm considering buying a TTX4 for SF6 but the seller says its stuck with the same message yours says, if...

The converter typically comes from the factory with language set to Chinese, you have to set it to english (or spanish) first before you can navigate the menu. To change the language, you would push the yellow Menu button on the converter and you should see the menu appear on screen. the SW...

Hello all, hoping someone has some info that can help here I'm working on repairing a Reflec Beat, Volzza version, original cabinet, but the location this game was at (a bar-cade) had a drink spilled on the infrared touch panel sensor and it burned out a transistor on the frame's edge. I...

It's more than likely from age and uv and not nicotine. It oxidizes over time, especially when exposed to heat, and begins to turn darker and darker yellow. Solution is Salon 50 peroxide, saran wrap, and a good powerful black light. I use 100w LED UV blacklight panels when I do the whiting...

The cable's black connector looks like the 60p connector found on the Sega JVS I/O adapters from Naomi era systems.

Not an exact match from what's written on the label you have, but pretty close: "WEL-RM008 ICT A6 V6 Bill Acceptor Note Validator AC 117V Cable Harness 8 Wires" https://www.ebay.com/itm/226668051544?msockid=3c5998a6ca8963652eac8eefcb936215 Must have been something that was part of the bill...