I'm restoring a very, VERY rusted Tekken 5 cabinet. I'm taking the whole thing apart to sand it back to bare metal. In disassembling the guts I came across this cable. It doesnt appear to connect to anything, but it has the same molex connector as found elsewhere in the system. One side is a 9 position, 3x3, the other is a 30 position 2x15. Looking at the owner's manual I dont see it listed, and I dont see where it would even be used. Anyone have an idea?
Tekken 5 Cabinet, Unknown Cable
- Thread starter Esom
- Start date
magicman
Student
Not an exact match from what's written on the label you have, but pretty close:
"WEL-RM008 ICT A6 V6 Bill Acceptor Note Validator AC 117V Cable Harness 8 Wires"
https://www.ebay.com/itm/226668051544?msockid=3c5998a6ca8963652eac8eefcb936215
Must have been something that was part of the bill validator that would have been in the cabinet.
"WEL-RM008 ICT A6 V6 Bill Acceptor Note Validator AC 117V Cable Harness 8 Wires"
https://www.ebay.com/itm/226668051544?msockid=3c5998a6ca8963652eac8eefcb936215
Must have been something that was part of the bill validator that would have been in the cabinet.