Recent content by marcburd

Hi @djsheep I'm happy to see that there is interest in this project !! Due to some personnal reasons I had to put this project on hold (changed jobs, had 2 kids and moved to a new home...) but I'll get back to it early next year. The microcontroller code is almost ready, I just need to...

I’m interested in buying one. Could you please add me to the list? Thanks

that's a great project!!! I've been following your work on it and it's awesome. Your work is clearly at another league compared to mine. I've wanted to make my own and use the 8Bitdo M30 2.4g as they are pretty reliable and readily available everywhere for cheap. Once I'm done with a first...

Thanks a lot!! I have a r2tronik Playstation to DB15 adapter. The problem I have with their adapters (at least the Megadrive/genesis and the Playstation) is that the output pinout doesn't follow UD Pinout and thus they don't work properly on a 6 button configuration if you are using the HAS or...

I have never used the teensy, but I if I had to solve this I would leave the port in tri-stade (input mode with no pull-up resistor) when no button is pressed and to output ground when button is pressed. That might work but you have to look at the microcontroller data sheet to understand how the...

Hi Everyone, I've started making a Genesis / Mega Drive 6 Buttons to Supergun adapter. Still in early stages but I'm already able to read all buttons from a wireless 8Bitdo M30 2.4g (including the Home and Star buttons which didn't exist in the original Sega controller). I'm using an...

Hello Everyone, Has anyone tried to power the CPS2 from the B board instead from the Jamma connector from the A board? Why I am asking such a crazy (or stupid) question: I'm thinking about ways to consolize my CPS2-Multi and the B board shell seemed a better place to put a pico-psu / HDPlex...

@Frank_fjs good day! If you are still making these I would like to sign up for two. Thank you very much.

I would like one as well! thank you

awesome, thanks for the answer!

Thank you very much Frank_fjs!

Hello everyone, Since we are talking about cables, I have a noob question: I would like to connect my NeoGeo MV-1C to an OSSC using the Minigun. Could I use a 8 Pin MINI DIN to SCART cable without any components (no resistors / capacitors / etc...) to link the minigun to the scart connector of...

@nam9 awesome work! One quick question: what kind of spacer did you use to fix/screw the PCBs into the case? I would like to use something similar to mine thanks!!!

Dear UD, We are dying to get an update on your marvelous work. Would you have any news to share with us on your UD-CPS2 kit? Thanks!

Hi, If possible, please add me to the list. I would like a kit! thanks