Recent content by mi213

I also had the same problem. With the version Remap_Autofire, the HAS mode is activated in the sketch by default. You have to set this to "0" in the sketch. Or deactivate with the controller. "To enable / disable HAS mode, simply hold the A button while powering the adapter on." In the version...

I also finished assembling my adapters for SNES. Flashed with the Arduino IDE with miniCore, worked without problems. The adapter works great. Good job and thanks @Arthrimus and @Frank_fjs I have disabled reading and saving the auto fire function in the EEPROM. After a restart, the adapter...

Hi @Arthrimus. I flashed your sketch for the SNES adapter on an Arduino Nano. Only temporarily soldered together to test it. My setup is a consolized NeoGeo with original cable SNES controller and wireless controller with receiver from 8bitdo. I have already ordered a couple of @Frank_fjs...