Recent content by NOAH

Thanks! I’ll check.

I’d like one please.

I’m curious to know if there’s been an agreed upon conclusion of what the best regulator to use at IC3 is. From reading here it seems like this is a pretty commonly failing component and I’m curious if the stock replacement maybe isn’t the best replacement. I see 78L05 listed as a 5v...

I’ve been thinking this over for more than 12 years now and still haven’t decided on what storage method to use for my pcb’s. I’ve considered the following: 1) Carbon-coated corrugated boxes with anti-static foam 2) Standard corrugated boxes w/ anti-static foam 3) Standard corrugated boxes w/...

Awesome! Yeah I was curious as it had specs for stereo but I didn’t find a stereo output. Makes me wonder if the audio even has a stereo mix or not.

Cool. Thanks!

Hey, everyone. I read that the sound chip used on this is capable of stereo, curious to know if the pcb can be tapped for stereo. Thanks.

It’s an MV1B.

ISo check the battery holder without the battery with the console powered on? Where would these SMD passives be found? Sure is annoying though, this consolized MVS I bought has been good for the money other than the bios/save situation.

Ok, so I installed the diode battery holder pcb and was thrilled when I turned my console off for a day and it saved the bios settings. However, after 3 days in the console the brand new Panasonic CR2032 reads 2.08 volts and doesn’t hold the settings for more than about half a minute or so.

I 100% agree and have difficulty putting into words why it’s such a good game, and it’s difficult to convey how impressive the graphics and presentation were for the time.

Awesome, man. I’m curious to know if the battery holder can be flipped parallel or if the pins won’t tolerate a bend. I’ve just gotta fit it within a console case as this is for a consolized MV1-B. If I could find a perpendicular CR2032 battery holder on digikey with the same pin configuration I...

Do you have some available for sale? I’d be interested in 2 or 3 myself. What’s required besides this pcb?

I’ve got a some questions regarding VMC’s, do VMC’s work with multicarts? And if so, is there a particular method of shutdown or game swap that’s required to make it work? With a newer/better 161-1 and Neo SD Pro I’ve had problems keeping saves and the card getting corrupted in a way that...

Cool! So in summary, this board allows use of a regular CR2032 without alteration to the existing circuit?