RGB's latest activity
-
A small workaround is possible :D -
RGB reacted to Darksoft's post in the thread New Namco System 2 Multi [PREORDERS OPEN!!!] with
Like.
Kaboom! More info coming soon. It's a 2 PCB Multi and you'll need a joystick game with this specific video GFX PCB to make it work... -
So, Fed Ex delivery was very fast! The chip is, as you said, a little to large, but with a little bendig it fits and work perfect! Thank...
-
CCC Shop / Stock Update 24/8/25 It's cutting it close, but we've still got a couple of Darksoft System 2 Multi's available for...
-
Selling Gun Frontier world ver. $500 shipped.in good condition. Video and audio works.
-
RGB replied to the thread Home Arcade System.The HD-15 outputs +5V on pin #9. Sometime in September, I will offer HD-15 to SNES NTSC Multi Out and HD-15 to Genesis 2 adapters.
-
Try removing and reinserting the socketed ROMs.
-
Do you have an oscilloscope? Even a cheap one should make tracking down this issue much easier. Literally follow sync signal and see...
-
Good sleuthing - that chip is likely faulty. Order another and swap it! :D
-
The LX240A part number is an abbreviation for SN74LVT240ADBR. You can order another one from Rochester Electronics or Mouser...
-
one can use one of these if really needed I guess 👍 https://consoles4you.ch/en/scart-sense-injector
-
Hello RGB, a feature suggestion for the next version: would it be possible to include a H and V pos shifter into HAS? That's the only...
-
that would be cool for sure but meanwhile getting an extron rgb rxi interface in between HAS and TV can do that.
-
RGB replied to the thread Home Arcade System.I tested the RetroTink HD15 to SCART cable, and it works perfectly. I dig the quality and look of this cable :) EU-based users should...
-
Actually, I think I may have been the problem. I tested it several times on one board and had the issue, but I tested a couple more and...