Recent content by spikechau

For a long time no test again for the result, the update status is Base on last time Mitsurugi-W say maybe i have some PCB has some fault on it, i try to brought a new Game A and B board to test again The new board comes with SF2 15 anniversary version, all great with no any issue, Then i try...

checked , no wire cable on B board backside , did I need found new B board for try ?

ok. little bit week past. i try to found 4Gb Samsung MircoSD - Sound Not Fix Re-Check the Board and Jumper with Meter - All Done and Correct and i found that, if i haven't connect the JT17 with PAL F leg 7 / PAL G leg 9 it haven't sound comes out. not like the the Video tech like sound crack...

I try to found some 4Gb Samsung for try first

yes, i make sure the board are properly inserted, now i using 4Gb Sandisk mircoSD card, i just have the smaller card on hand now, another have 32Gb Tosiba and PQI but not try, any recommendation for SD card?

So I did that like video guide setting are the same , thx darksoft detail saw the JP 10/12 short by default , I make it open again and test by meter but same issue even I use the PAL F from come with my board and connect to Pin 17 with leg 7 and Darksoft send me the PAL G connect Pin 17 with leg 9

you means from jumper 1 to end all open? But why the video guide and PDF have setting open / close I just want to know deeply , if all open will it damage the board ? Thx you

i fix the leg use wire method, i try to clear cut the JP 10 and 12 make it open, test by meter show it are open but same issue

Finally I tear down to take photo then broken the leg How can I fix it , poor m

i try to left the leg 9, but even i try to connect witht the J17 or not, it still happen, also i try to reformat and copy the the game still happen.

I haven't lift the leg , is it need to left leg number 9 like Pal G ?

Hi all, thank you for support the sound issue here, today I got the PAL from Darksoft I try to install to my board and try, I use the Rev 6 b board, after install the new chip the sound little bit better than before but still have issue, what I can try on next step ? Please advise CPS2 sound issue

Now Hong Kong a lot of game centre change to gambling machine like casino, poor

i try to look around at taobao.com

may I get help from you two experts? I'm a beginner of technical solving