Recent content by Suteneko

When I boot up my newly acquired Taito Type X2 I get a "TCG Error: MPD Command Failed" Message as pictured: How can I solve this? I presume this is not related to the battery as that is measuring at 3.04v which should be okay? Pressing F1 allows everything to boot up and work fine. But would...

I've been experiencing soft locks at I-no on Guilty Gear XX Slash using the old Multi-BIOS, so kind of hoping these new ones stop that happening.

Thanks for that. I don't suppose anyone would mind explaining to me how to figure out what tests to use on the TOP3000 for which RAM or links to read? I've be unable to find any information to help me with that and I'm clueless right now.

Just want to say mine turned up today and thanks! :)

Created a label for my Elevator Action Returns Conversion and got a local print shop to print them off. Unfortunately had no option for curved corners so had to try to cut them myself with a craft knife and scissors which hasn't resulted in the best job but I guess they are good enough. Have a...

Also thank you for the update. Happy to wait.

I already sent @Raph_friend a PM with the details but really apart from the IC21 DD77-14 required for 27c2001 (0x40000) PROM's and DD77-15 required for 27c4001 (0x80000) PROM's, there really isn't much to Taito F3 conversions and all the information you need is easily found within the Mame...

Thanks for the Link @AlxUnderBase I did see it earlier in the thread and downloaded it already but I haven't updated yet. Just to clarify though on 8.37 at least there is no profile for 27C400 but there is one for 27C800 which is the same pin out apart from having two extra pins and double the...

I'm using a TOP3000 with ver8.37 (2018-02-04) software on Windows 10 and all SN74LS164N I test on it including NOS always test bad. For programming and reading 27c400 I always set it to 27C800 and ignored the 2 floating pins that do not exist. Then just either doubled the binary or...

Awesome it is all sorted now. Appears it was a problem with the M27C160 in position 45. That EPROM's Data appears to be okay still but it is definitely faulty. Not sure on the policy regarding giving out that information here. I just checked out the Taito_F3.cpp from Mame to find out where I...

Many thanks for the reply @andynumbers I was suspecting it might be too slow 27C160 but they all are labelled as 100ns which should be fast enough. Have no idea of the source for the ones that were used as just re-used what was already used in the Puzzle Bobble 4 conversion. Think I only have...

I had a Puzzle Bobble 4 (converted from Puzzle Bobble 2) that came free with a Taito F3 motherboard that I bought a while ago. Because I own originals of both Puzzle Bobble 2 and 4 I decided I would try to convert it over to Elevator Action Returns. It has a d77-15 PAL and was already running...

Would like to order one as well and have sent a PM.

Just want to say great service from YanoArcade and would be very happy to purchase from him again!

Sorry for the delay in sending payment. Check your PM and thank you in advance.