It's been a while since i don't play this games but i remember the sdoj xbox360 version was pretty good. It even came out in Pal version and its worth something like 10 euros or so.
I also have mostly japanese 360 versions of these cave games and a part from ddp doj that was not great (ps2 was...
Now that i have an original board (Double Axle) i have figure out its just a matter of PAL/GALS because the boards are identical (and they are the last game produced on Z hardware, both 1991).
Unfortunatly i'm not able to copy these and they were removed from jammaarcade (for good reasons i...
Nope. 2MB are for 27c160 (27c322 are for 4MB).
512kb are for 27c400 and 128Kb are for 27c1024.
You have to consider the 8bit mode while using these. Other thatn thatm youu have to burn & allocate in right spot. Then jumper setting. thats it
Sega Rally is unprotected (both 50" and Twin version) so yes, you can.
You basically have to program all the eeproms, put in the right spot and set the jumpers correctly (you can try copy them by pcb pictures).
They usually requires a lot of 27c322, 27c160 and 27c4096/4002
Sf5 is Crossplay, there's no care in wich community is bigger. All tho, i didn't want to pay online so thats why i chose PC instead of montly psn payment. Pc version is also way better than console counterparts, speaking of delayed frames and framerate in general.
If the X4 could play online...
I remember that there was a mod for the pc version in order to have the type arcade but i'm not sure if it still works and where i saw it. But i have downloaded the dump just for fun and it was working on my computer. I have a red chewlix with similar set-up but i ended up using the normal pc...
I put on sale stuff that i've lost interest in repair. Shipping price is not included.
5x Sunset Riders, 3 of them boots up but they are stuck in RAM ROM TEST.
2 of them are watch dogging. There's a "special" one that has 90% of the TTLS socketed.
They mostly have tested rams and new eprom...
Yes, defenetly. But it's not an out of the box solution and requires some work.
Thats exactly how i fried my first chassis. NEVER do that. Never. You can seriously blow the tube with the EAT, no jokes.
You can't do that. There's no "magical" trace or switch that can do something that is designed to do else. Maybe with broadcast monitors, good luck find one of these.
Do you wanna play 31khz/25khz on a regular Crt? Get yourself an EXTRON VSC500, these are beasts and work flawless doing this job...