Recent content by timohendriks200

Here it is, had to size it down so hope you can see enough on the pics :)

OK im gonna try it. Do you have some pictures from your jamma switcher with the wires connected so that i have a better idea / view in my head what to do :)

Lol this is what i need. I have 2 cheap jamma switchers from the early days. One side works perfect, the other side flashing video, i tried out so many possibilities, resolder cables / connectors etc. So now reading your comment i think we have the same switchers. Do you have the pinouts for me...

J2 gives sound and J1 doesnt. tried with 1 game in J1 and no sound at all.......

the only "Jumper spot" i could find. It's next to the telecom connector were you put in the cable that comes from the receiver

1) 5+ v Yes, i had to tune it up to get the games booting. Those midway boards always need a little over +5.0v 2) Ok that might be an option, havent found a jumper on the board. I contacted the seller with my problem.... 3) Jamma extended cable and i switched both cables but problem stays the...

Jup it's the same one. I already have a 6 in 1 switcher in the MK cabinet next to my KI cab. So i decided to put in a 2 in 1 and a 6 in 1 because when i put in 2 times a 6 in 1 it will switch games on both machines trough the remote.........

Hi Guys, i have a KI 1 and KI 2 board combined woth a 2 in 1 jamma switcher with remote (cbs 8118) Games work both, but when i switch i keep getting the sound of the game in slot J1