Recent content by YerpS3s

Our panels are a drop in the bucket of other orders he receives, I'm sure he will deliver, I've ordered 15 panels in the past 4 years off Alberto, some come late some come early. But none are ever bad and the quality is always impeccable. No offense to other panel manufacturers but there's no...

With the 2930 being used in the player 1 side, the wiring goes directly to the PSU. Im guessing the 2930 is wired differently than the 2931, and the harnesses that carry demag over to player 2 is wired for the 2931/2933 . the 2930 DEMAG is wired in reverse.

Went back to the cab, installed 2 2931's and wired up demag like it was stock. and it worked fine. The demag circuit with a 2930 as player 1 was causing all the issues. By depinning demag at @nem suggestion the monitors worked fine. IF anyone ever uses a 2930 in a versus city remember this.

For now i guess i can put the auto demag switch on the p2 chassis. But for now i unplug p1 and plug it into p2 and demag from the PSU the p2 monitor. I thank you for the help. This was a gremlin that was haunting me for a week LOL. I thought i burned 2 different chassis's, but since i know this...

I depinned the 4 pin connector, and turned on the cab and it worked just fine.

Demag was the problem yes

PM sent

Youre right, its not the same. Should I swap the ms2930 power with one thats pinned the same as the others?

Okay, so both monitors work fine when running alone, but when theyre both running at the same time. I get this shortage issue. So player 1 monitor alone in player 2 wiring harness works fine and vice versa, when BOTH are inside the cab at the same time drawing power I get a short.

After talking to @Hatsune Mike hes told me the flyback isnt shorting but there's a short definitely somewhere only when both monitors run at the same time.

Here's a video of the player 2 monitor running outside the cabinet on a supergun View: https://youtube.com/shorts/JoJWDr8zJ88?is=H6UlI_BN9ER8_LvN

Sure I have a test bench made from a astro city wiring harness and has nanao power and rgb connector. Ill test both outside again

No and yes, any configuration of two monitors causes the short. If i run one in cab 1 or 2 it'll run fine

I purchased a New versus city that has an odd issue. When running a monitor in either side its fine. But if both sides have a monitor plugged in and installed, it causes a short on the fly back of any monitor i plug into player 2. It only happens when both monitors are plugged in. I have reason...