MP07-IONA-US V2 Case

Here is the case for V2 of the MP07-IONA-US. It was quickly put together using my original case as a base, then adjusted to fit the new design based on the dimensions provided on https://toyoshim.github.io/iona-us/en

Please consider this an UNTESTED case, since I don't have a MP07-IONA-US V2 to verify how well it fits. All I did was make 1 quick test print with junk filament to make sure the top and bottom of the case + snap tabs fit correctly. Print at your own risk.



https://www.thingiverse.com/thing:5332682

Edit: Forgot to mention: If someone does print this, let me know if it fits. Confirmation on whether or not the case fits well or needs adjustments would be nice.

Nice work @Zepherino - I have both revisions of the boards here and when I get a chance I’ll print them up and give them a test. Thanks for sharing.

Awesome, will give this a shot! Thanks so much.

I just ordered one from https://craftcloud3d.com/ and it was $5 plus $7 shipping (and .86c to make it blue ).

Will report back when I get it