What's new
By:

Blast City / Astro City / Astro City 2 / NNC - Restorations

Segafan1985 said:
Do you think it is a limitation of the stock Noir monitor or the PCB itself?
Click to expand...
I can't answer the Noir monitor question as I don't have that cab myself. My issue is I haven't been able to get a 31khz signal from this hardware to display on any compatable monitor. It's not a problem for any other hardware I own, those all work fine in 31khz mode on pretty much anything I connect it to that can support that signal - its only my System 256 where it doesn't work for me.
 
IMG_0224.jpeg


IMG_0226.jpeg
 
IMG_0265.jpeg


About 1.5-2 inches too high. Not sure how we screwed up the measurement. Sweating a little hope when we lower it we don’t encounter another planning error.
 
Got a little closer but I think we need to dremel the bottom rail slightly and continue to adjust .

IMG_0383.jpeg
 
Well I jumped the gun. I placed the touchscreen in front of the monitor and in my personal opinion it kind of blurred the crystal clear image ever so slightly. So I decided to screw in the speaker grills and the bottom control panel railing. Holy crap! The fitment is nearly perfect! We slotted the screws so with a little adjustment I think I am done for now.

There are gaps on the sides about 3/4 inch on each side but since the pras is beautifully painted black inside I am happy with the result. I’d say we had about 1mm between the fractal north case, the monitor, the plate, etc.

Time to go to bed.

IMG_0421.jpeg
 
You must log in or register to reply here.
Back
Top