Search results

  1. B

    Help with CPS3 with 3rd Strike NCD

    I can get one to you much cheaper than $41 USD shipped DM me if you need one dtill
  2. B

    CPS 2 Graphics Issues when using a new power supply

    I think I have worked this issue out. It looks like the amp draw is really close to the PSU max. While it's no where close to 6A on the 5v, I didn't realise that the 12v was only 2A, for some reason I thought it was 3A. Combined everything running in zthe cab would be close (just under 1A on the...
  3. B

    CPS 2 Graphics Issues when using a new power supply

    Even without the pot installed voltage adjustment was much easier with it, but you are correct in that I wouldn't work off that alone.
  4. B

    CPS 2 Graphics Issues when using a new power supply

    Yeah, I have a voltmeter reading the JAMMA edge on my harness, and even thats not perfect. It's also hard to almost impossible to see when you are playing around with the PSU. The idea was to tap the PSU voltage adjustment pot and put a dial in next to the new voltmeter. If you knew the JAMMA...
  5. B

    CPS 2 Graphics Issues when using a new power supply

    Hi Guys a quick question, I changed out a PSU today in my CPS 2 Multi Cabinet. This cab was initially going to be the home for a CPS 1 multi from aliexpress I had picked up as a result of it not working. Someone left it with me for repair but never picked it up. Because of this I had built the...
  6. B

    FS FS CPS1 Multi NOT Darksoft, plus other CPS bits

    I can provide photos of the CPS 1 B board and it will come with compatible C board. It is currently packed up so I didn't want to unpack it unless there was some interest
  7. B

    JAMMA Extension Cable - Interest Check

    I still have a few boards left. So in an effort to clean up my work bench, I am happy to ship my JAMMA extender anywhere outside of the US that @raynex does not cover (as long as you are happy to cover shipping). I have both 30cm and 50cm cables, which results in a total extender length of just...
  8. B

    WTB CPS2 A and B board plastic shells/case

    Preferably, I can 3d print and laser cut myself, so if they are not original they would have to be pretty special to peak my interest.
  9. B

    FS FS CPS1 Multi NOT Darksoft, plus other CPS bits

    Multi Board in my cabinet and the A board out of the cab.
  10. B

    WTB CPS2 A and B board plastic shells/case

    Pretty much what it says my Darksoft multi is naked. Don't have to be in perfect condition, I am happy to restore them, but they should be able to be restored.
  11. B

    FS FS CPS1 Multi NOT Darksoft, plus other CPS bits

    1 x CPS 1 multi, looks like a chinese copy of the French multi. Advertised as having 86 games however many are hacks or region versions. Installed on a CPS1 'long' a board and including compatible c board, remote control and 2 player kick harness. $500 aud plus shipping. 1 x CPS 1 conversion B...
  12. B

    Cps2 game test config save question

    I have wanted to know if this is possible too. I have thought that at the very least it should be possible with a small modification to the rom. Interested to hear what people have to say on this.
  13. B

    Australian Roll Call / Registry / Deals Thread

    Cable update, done ready to go, here is an example in 50cm. I keyed the jamma plug because I typically use wire color to determine direction when digging in the back of a cabinet. I wish sellers could measure better, they are both 50cm cables but the atx is about 2cm longer.
  14. B

    JAMMA Extension Cable - Interest Check

    I keyed the jamma plug because I typically use the wire colours to identify direction when i am digging around in the back of a cab and they are not on this cable.
  15. B

    JAMMA Extension Cable - Interest Check

    One finished in 50cm, I sort of wish some sellers could measure better, they are both 50cm cables but the atx is about 3cm longer than the idc.
  16. B

    Australian Roll Call / Registry / Deals Thread

    CPS2 buttons the damn things always break. These (in white) are free to a good home, I'll even cover postage in Australia. I see them going for $25+ postage on ebay quite regularly. I can typically supply them much cheaper than that. I typically do grey, green, yellow and blue. White was a...
  17. B

    Australian Roll Call / Registry / Deals Thread

    Anyone seen these? 3d printed MCAs not my project or design but I was lucky enough to get a hold of one of the first batch printed and the play pretty good. PLA printed bottom, shaft cover and base grommet cover, TPU printed grommet and Mits. Shaft and ball. The 3d files are open source I...
Back
Top