Search results for query: *

Sorry I forgot after I made the update, they are there now.

Monitor is a 25k7501, I added some pictures

I have been working on a Cruis'n World upright. I'm ready to put everything together but it has been a while so my memory is blurry. however, I can't find any of my pictures for some reason. I need help to put it back together. I also have a question: does the upright have an isolation...

Shooter, rambo, 2spicy, HOD, jungle etc

No need I speak french, thanks a lot

Hello guy I just acquired a Sega Lindbergh yellow. I have been reading about a multi and I have been trying to find it many of the leads are directed me to here. can anyone help me ?

done, done

well I guess I'm getting some dvd and trying when I get home. I will do the 2nd disk I have , then 2.14 and finally 1.08b

i dont remember exactly but lower than 1.34u. I will check it out when I get home. as a matter of fact I will try the restore with it, also looking for a new ram, did not see any on ebay

I bought it from an operator, it is not a conversion in the cab I found 2 disks 1.34u is the lastest version so I thought i will use this one, now I'm thinking I need to try the second recovery dvd. I reached out to betson they are reaching to sega but I got impatient so I got a new dongle and...

I will look for a new RAM today, I was reading that chart the minimum software is 2.14 the disk I have is 1.34 could that cause an issue?

hello people, I’m coming to you for help with my Target Terror Gold I acquired it some week ago, first, the PC was not posting (nothing on screen). Changing the CMOS battery fixed that issue the PC is posting however I get the blue screen of death with the error code : 0x0000007b...

I successfully double L1 and H1. I need to erase and burn everything again. I have the right files now for M84. However, I'm still wondering what is the difference between a-ho-u.8d and a-h0-v.rom ?? they are exactly the same size. I feel like they are the same files because the CPU has 4...

OMG, how do I debug the CPU? I know which 4 eeprom the CPU program is so reburn and retry?

I’m using a 27C1001. It was the one used for the r-type conversation. I reused them after I erased them. I did not double the data. How do I do that?. Also I’m not sure I got the correct rom because it did not mentioned M84 per say but other irem board that also have hammerin’ happy says the...

Thanks very much, from I can see see I did it correctly. Can you zoom in on the different jumpers for me. Maybe they were changed during the attempt. I also have a wire under the lower board. Now I’m thinking it there normally to repair a trace or is it redirecting a signal has part of the...

I did not. can you confirm if at least I burnt the correct roms and placed them in the correct position? I'm going to look into the jumpers to see. Thanks

So a bit of background, I bought an Irem M84 hammerin’ harry 2 layer board. The previous owner was trying to convert it to R-type. So When I got it, it had an R-type rom on it. The owner did not know where the original Hammerin’ Harry rom was. So, I erased all the EEPROM and burnt Hammerin’...

any update on this Multi?

I tried my system the other day with a DVD. it gets stuck at the loading screen. I think the DVD drive may be bad. Can yall help me find a proper replacement? I did some research but got confused.