Search results

Did anyone perform the 31k mod on a MS9-29SU with a Hitachi tube? When i do it, i get massive rollover on the right side, even with a freshly recapped chassis. Would love some help on how to fix this.

Would love to buy a kit!

Any update on this? It has been half a year :(

I have also tried without debugging mode on and sniffed the traffic. i attached both logs of original NA-JV and Mega-JVS. As you can see, the MegaJVS gets stuck after sending it's ID.

I attached the log with Hterm (Hex and Timestamps) I did try it with Naoki's library which can be found on https://github.com/NaokiS28/jvs and that works. Only downside is that it would destroy the purpose of this device since none of the profile switching works. The ES3 can use either one of...

Anyone else with an ES3 that can confirm if this I/O works for them? It looks like it's too slow with responding. Which will make the ES3 give an I/O error. This is even with the correct ID set. But with debugging turned on. It won't even reach that state. Using an official NA-JV works fine.

Are there any plans to add support for NA-JV based systems? Namco ES3 for example? These systems currently error out on this I/O even when the I/O Board String is changed.

Managed to get the SD card situation fixed for now. Played around with some SD cards from varying sizes. 256, 512, 2GB, 4GB, 8GB and 16GB. All of them rarely worked apart from the 256mb that is now working fine. I will keep it in check if the 256MB starts acting up aswell. If so, i'll replace...

Prices vary a lot between countries. Just keep an eye out on your local marketplaces and buy it if you feel the price is right for you.

I would be able to do that. I will first try with a few different SD's to play around. If not, i could replace the slot. What part number did you use for this exact slot?

Would probably have more luck getting a Ferrari F355 Challenge and converting it to an Outrun 2. Can also save you some money :)

Since today my MultiJVS has been starting to act up. It won't read any profiles from the SD Card and it does not get detected by the PC to flash. It however still works fine as a JVS I/O on the default setting. Anyone else had this issue?

PSU runs slighty warmer but still within spec. Not sure how it is when put into an actual cab.

Never just randomly try and plug a dongle into a windows machine. Windows automatically tries to write system volume info to that drive when it connects. This breaks/wipes some dongles. For your ES1, What i had before is that the motherboard was unaware of it's last power state so it stays off...

Yes, there are 3 revisions. ES3A ES3B (8GB, GTX650Ti) ES3X (8GB*, GTX680 or GTX760) ES3A and ES3B have a.f.a.i.k. the same hardware, just a new revision.

Hi, WMMT3 and WMMT5 do not use the same boards. WMMT3 is still on the old namco design with STR2 FFB. WMMT5 is on the new design with STR3 PCB. The I/O and basically everything is different aswell. I'm currently working on trying to get the newer versions working in old cabs, but i don't...

I would still be highly interested in this solution. My intention is to run a WMMT3 cab and run sega hardware in it. It would be amazing if we could perhaps together make this work on the Mega/MultiJVS. I have the following boards available for testing: - Naomi - Naomi 2 - TriForce - Ringedge -...

I'm sorry. i totally misread the problem. I thought you said no fans spin up. My bad!

That's good news! Can't wait for it :D

Edit: Didn't read the question properly. nvm!