Search results

  1. M

    Type X3 video card and CPU upgrade

    i ran into the same issue. was a simple solution for me though. i had a spare PS from my last pc build. i just replaced mine. But i only did that because i couldnt find my 6 to 8 pin adapters.
  2. M

    Blast city PSU help

    copy that. i have checked fuses. all are good. as a matter of fact i swapped the power board from my other blast city and it worked. so the its defianaty on the board.Other than recapping, im. it sure what to look at next
  3. M

    Blast city PSU help

    im new to psu work. im not sure what the hot side is
  4. M

    Blast city PSU help

    So.. looks like my blast city psu went out. i fully recapped the psu and amp, but no luck. the the power is still passing through, but no 5 volts. i have another psu and tested it and i got power back, but that psu is making a funny sound. Any suggestions out there on repairing the psu?
  5. M

    new net city monitor issues when jamma wired

    yup! thats next on the list
  6. M

    new net city monitor issues when jamma wired

    i went ahead and just unhooked the spare port, and moved the vga port over to that connection. Bam! all works now as it should. only issue is i have to open the back to swap it back overto vga if i want tomswapnit back to naomi
  7. M

    FS For Sale: New Net City Extended Remote Boards

    still have any of these for sale?
  8. M

    New Net City enhanced monitor remote pcb

    @codecrank do you have any of these for sale?
  9. M

    new net city monitor issues when jamma wired

    Before i unhook stuff, anyone know whatvyhese 2 wires are for? there are 2 wires coming in from the 2nd harness. if i unhook and swap the connectors, do i need to unhook these?
  10. M

    new net city monitor issues when jamma wired

    so, if i swap both of these connectors, this should work?
  11. M

    new net city monitor issues when jamma wired

    would it be as simple as unplugging the not used one and moving the one that feeds off the 15 pin connector to the other pin out?
  12. M

    new net city monitor issues when jamma wired

    pinout looks good. here is what the chasis input looks like. i see 2 on the board. but they are both connected. the 2nd one only has 2 wires going into it. but im not sure wher they back off to in the cab.
  13. M

    new net city monitor issues when jamma wired

    i got it from ebay seller japan arcade. i have used alot of their harnesses and they are top quality. they are working with me and have offered a refund, but i wanted to check here before i went that route.
  14. M

    new net city monitor issues when jamma wired

    that what i had thought as well. i didnt see another spot to hook up though
  15. M

    new net city monitor issues when jamma wired

    Hi. i just got a new jamma loom for my ew net city to convert it over. so far everything hooked up good, but the colors are off. when i hook back up my naomi, everything is fine. The monitor in my nnc is a D29cq51. but im not sure on the chassis. Does anyone know if this monitor auto syncs...
  16. M

    Taito Type X3 (TTX3) Round-Up thread

    for the group here, i found the issue! when my video card was installed, i didnt reaet my custom resoltions. re entered these and all is good again!
  17. M

    Taito Type X3 (TTX3) Round-Up thread

    Found a weird anomaly with the artax image. i have a ttx3 with i7, upgraded gpu to 2060. everything is working good except for i have no video on any blazeblue game. has anyone seen this before?
Back
Top