Search results for query: *

Yes, the USB adapter is being developed :)

In V5.0, there is a 470R resistor on the CSync line, even when the TTL level is selected. This doesn't seem to affect equipment expecting TTL levels, as there's either no termination or very high termination, such as around 2K. This serves as a safety mechanism - when connected to a device...

Congrats! I haven't bought one yet. It must be RGBS for sure, and the connector shouldn't matter. Just make sure to set the CSync to TTL if you use the HD-15. TTL can also be safely used with the R4K's SCART input, since there's a 470R series resistor in the HAS. @zionfarm Have you tried...

Does the LED light up? If so, it's the config issue. Have you tried to go into the rapid fire mode and exit without pressing any button? @9999 Damage The clear rectangle is just a spare plexiglass window for the screen in case you don't like the fluorescent green that's installed in the case :)

I'll be rolling out my own USB adapter (not based on the USB2DB15), specifically for the HAS V5.0, supporting two players, aiming for a July release. It already works perfectly with the GP2040-CE (in the PS4 mode for now). More details coming soon.

I apologize, I must have missed those. These are M3 screws. If you can't find the correct ones, then drop me a PM and I'll send the missing screws.

Do you connect the SF3 directly to the supergun? If so, then something's going on with the SF3. However, if you use a JAMMA extension harness with the kick harness connected to the extension (not the supergun's kick harness output), you must enable the 6 button JAMMA output in the supergun. By...

Voltage drop happens in cables, relays, and connectors. Cranking up the 5V rail to compensate isn't ideal, because if you tweak it for the CPS-2 and then switch to a PCB that doesn't need much juice, like the MVS, the voltage could go over 5.4V.

@Porthos Great seller, very easy to deal with. Proper packaging and fast shipping!

Have you tinkered with the CSync setting in the new HAS? You can try that. You can also safely use the TTL level CSync. It has a 470R resistor in series, so your receiving consumer equipment won't see the 5V CSync, but around 0.7V max, which is safe.

Thank you for the pics! Let me know how it goes. I use the UDUSB + DS4 to test each HAS. I don't know this PSU, it seems like a no-name. I don't plan to release an adapter for it. Thank you! The case was designed by yours truly ;) . I'll see if I can offer the HAS with the new shell. The...

Awesome! Please share a photo of your setup :) The white fuse is 2A.

It will work just fine with the HDMI-modded CPS-3.

It will be available again for sure, but probably not soon :(

The risk of static charge buildup is about the same as with the acrylic plexiglass case. Both can build a small charge if you rub them against something like fabric, which I wouldn’t recommend :) You will be the most likely discharge point when you touch it, too.

Green/black would look slick. Too bad my 3D printer will be busy for a while now.. but I'll print this combination :)

I see you placed an order. I'll print the purple one instead of light gray :) Thanks!

After a long break, I've finally reopened the store! The HAS is now available with a proper enclosure in three colorways. Printed at a 0.1mm layer height to minimize visible 3D printing lines (each case takes +3hrs to print :S). Stock is limited this time, so grab yours while it lasts -...

Awesome run, it was a pleasure to watch. It's been YEARS since my last Mushihimesama 1CC. I should take an example ;)

Thank you for the pictures. Rotate the signal harness 180 degrees, and everything will work. The harness SHOULD have a white/golden mark on one end - it should face the PCB game (the same goes for the power harness).