What's new
By:

Home Arcade System

djsheep said:
This case is lovely. Feels so good in the hand protected like this. Sturdy like a NES cart. Would make transporting it a breeze!

IMG_8145.jpeg
IMG_8147.jpeg
Click to expand...
Red? I didn't see Red. I WANT RED! 😬
 
msamiullah said:
@RGB I have a question regarding ESD safety regarding these enclosures. I am assuming these are printed in PLA or Nylon which are insulators by nature, will this not cause an issue regarding ESD ? (I have limited knowledge of electronics so please forgive if I am missing anything obvious here)
Click to expand...
The risk of static charge buildup is about the same as with the acrylic plexiglass case. Both can build a small charge if you rub them against something like fabric, which I wouldn’t recommend :) You will be the most likely discharge point when you touch it, too.
 
Will the Reco be available again soon , I think I got the mail in the morning went to order when I got in from work and it was sold out :(
 
trev1976 said:
Will the Reco be available again soon , I think I got the mail in the morning went to order when I got in from work and it was sold out :(
Click to expand...
It will be available again for sure, but probably not soon :(
 
I've received my HAS, the power supply cover and the purple enclosure (thanks again ^^), so happy and impressed event if it's not my first HAS ;)
Just a question for the fuse.
There are 3 fuses, I think I can read 1.6A on one of them, 2.5A on another one, but on the non transparent one, I cannot read the value.
I think you sent me the ones for 220-240VAC as I live in Europe and the non transparent one is the 2A one.
Am I correct ?
 
Last edited:
  • Like
Reactions: RGB
It's not yet working, but I'll post some pictures of my setup as soon as it's gonna be working.
Out of the box, my USB Q4 RAF controller plugged to an USB UD GAME TECH adapter is not syncing when it used to be working with my previous HAS 3.1.
I think I need a bit of setup / fine tuning.

IMG_0152.png


IMG_0153.png
 
@RGB is it possible to do an adapter for the power connector so that it can take this connector from these sort of power supplies (dnt know what they are called). I think these power supplies are very convenient for a small desk type setup!
1746478962166.jpeg
 
Last edited:
The new case is awesome, whoever designed it, did a great job. Very precise and compact. I would like to suggest may be offer HAS unit with one of the cases ie either the plexi case or one of these newer 3d printed cases. As currently HAS comes with plexicase and people (like me) who bought these 3d printed cases has no use for the plexi case and the plexi case would be wasted and we dnt condone wastage. Just my sharing my thoughts here!
1746489258096.jpeg
1746489267977.jpeg
 
tom5151 said:
Out of the box, my USB Q4 RAF controller plugged to an USB UD GAME TECH adapter is not syncing when it used to be working with my previous HAS 3.1.
I think I need a bit of setup / fine tuning.
Click to expand...
Thank you for the pics! Let me know how it goes. I use the UDUSB + DS4 to test each HAS.

msamiullah said:
@RGB is it possible to do an adapter for the power connector so that it can take this connector from these sort of power supplies (dnt know what they are called). I think these power supplies are very convenient for a small desk type setup!
Click to expand...
I don't know this PSU, it seems like a no-name. I don't plan to release an adapter for it.

msamiullah said:
The new case is awesome, whoever designed it, did a great job. Very precise and compact. I would like to suggest may be offer HAS unit with one of the cases ie either the plexi case or one of these newer 3d printed cases. As currently HAS comes with plexicase and people (like me) who bought these 3d printed cases has no use for the plexi case and the plexi case would be wasted and we dnt condone wastage. Just my sharing my thoughts here!
Click to expand...
Thank you! The case was designed by yours truly ;) . I'll see if I can offer the HAS with the new shell. The problem is that it takes a very long time to print, and outsourcing the 3D printing would raise the cost. I would also lose control over the quality, colors, etc. It seems too risky for such a small endeavor. The current enclosure STL will be shared when I release a newer HAS version.
 
RGB said:
Thank you! The case was designed by yours truly ;) . I'll see if I can offer the HAS with the new shell. The problem is that it takes a very long time to print, and outsourcing the 3D printing would raise the cost. I would also lose control over the quality, colors, etc. It seems too risky for such a small endeavor. The current enclosure STL will be shared when I release a newer HAS version.
Click to expand...
Epic!
 
RGB said:
I don't know this PSU, it seems like a no-name. I don't plan to release an adapter for it.
Click to expand...
This is AULT SC200, and it apparently used to be a very popular supergun power supply, at least if this 2005 forum thread is to be believed, so I guess there could be some value if lots of people have these laying around, but I think this thing has been long discontinued.
 
RGB said:
Thank you for the pics! Let me know how it goes. I use the UDUSB + DS4 to test each HAS.
Click to expand...

My controller now syncing, I was in PS3/PC mode which has never worked with this adapter.
I think I need to enable the button 6 in HAS config and everything will be good.

Unfortunately, I have a weird issue with the video output on my CRT screen.
It sometimes works, sometimes stops working, most of the time, it doesn't work at all (in this case, I have to force my scart switch on the correct output, but I only have sound).
If I switch back to my HAS 3.1, no issue ?(
 
Have you tinkered with the CSync setting in the new HAS? You can try that. You can also safely use the TTL level CSync. It has a 470R resistor in series, so your receiving consumer equipment won't see the 5V CSync, but around 0.7V max, which is safe.
 
You must log in or register to reply here.
Back
Top