Search results

  1. Toyxf

    ES3 to wrong address

    Who's that lucky boy?8o
  2. Toyxf

    Namco System ES3 Teardown and some basic info

    It doesn't matter, the power supply is 1U FSP(for server use), you can buy 500-600W products at computer market, and you can replacement it, so you don't have to worry about power consumption.
  3. Toyxf

    Namco System ES3 Teardown and some basic info

    If you upgradeCPU,the radiator(fan) must be replaced. The original radiator has a very low rotation speed, so I use the low-power I5-3550S as a long-term running device. It is not recommended for high-power devices(I7-3770). And the height of the radiator is limited.
  4. Toyxf

    Namco Nori Ver B, JVS to PC/PS4?

    Hi dude,you wanna use NAMCO Carbinet play PC games? I/O use JVS board,yes? My friends have solution,He handmade it. It's support PC only.
  5. Toyxf

    Namco noir top LED, where does it plug in?

    It's very useful,I use it for my cab button(translucent). You can also choose 5V products.
  6. Toyxf

    Tekken 7 round 2 sync issue

    Use 3rd router(tplink,netware,whatever),setup LAN ip address to 192.168.138.1,netmask 255.255.255.0.save. In HDCP menu, setup ip range 192.168.138.50 to 192.168.138.200,netmask 255.255.255.0,gateway 192.168.138.1,save. Reboot router ,connect your machine.
  7. Toyxf

    Namco System ES3 - Tekken 7 Graphic Problem

    This is a faulty soldering of the graphics card memory and needs to be re-soldered。 Find a place to repair Cell phone can be repaired it.;)
  8. Toyxf

    X2 Speed glitch Tekken 7 R2 4.20

    Emm,it's V-Sync issue.
  9. Toyxf

    Namco System ES3 Teardown and some basic info

    There is a jumper pin on the motherboard that can power on system, near the 24 pin power cord.
  10. Toyxf

    My arcade game center(Tekken)

    This board have TPM chip,So Namco use it(2010-2015). Most of the new products now support this function, but in terms stability, Super Micro is best. I suspect that supplier has the technology to crack the chip, they can replace the graphics card with 1050ti, and even replace the 1080ti.
  11. Toyxf

    My arcade game center(Tekken)

    Supermicro C7B75,i5 3550s,8G ram.
  12. Toyxf

    Recently acquired a broken ES3, let’s try to “rebuild” it!

    It looks a problem with BitLocker, it may be the failure of the motherboard TMP chip, or the hard disk may have bad sectors.
  13. Toyxf

    My arcade game center(Tekken)

    This joystick what cannot be provided to the public, it is too expensive.
  14. Toyxf

    My arcade game center(Tekken)

    And girl
  15. Toyxf

    My arcade game center(Tekken)

    Transparent buttons and joysticks lighting.
  16. Toyxf

    My arcade game center(Tekken)

    If you have more console,you can see it.
  17. Toyxf

    My arcade game center(Tekken)

    This is Tekken base In my city,other place game console can't running. How should I put it, other bosses looked down on this Game(Tekken) and thought it was not profitable. In my positive encouragement, Tekken was retained. There are a lot of Tekken players who come to play weekend. I also...
  18. Toyxf

    Recently acquired a broken ES3, let’s try to “rebuild” it!

    Oh? I didn't say it? I originally had 2 units Tekken 7 Vanilla(HP bar is blue), and then upgraded to FR(HP bar is yellow), and then to TK7 ROUND 2(S2) - last character is CRAIG MARDUK. The current version is the final version of S2 (last character is julia) that everyone can download. The...
  19. Toyxf

    Recently acquired a broken ES3, let’s try to “rebuild” it!

    Players mainly focus on the input of the controller and the output of the display. They point that the graphics is 2-3 frames slower than expected, which punish 10 frames but cannot be realized. In terms of hard disk read speed, do not have such problems, which should mainly appear in the 2...
Back
Top