Search results

I have a relatively rare board that I am really wanting to get up and running: Techno Drive. Game does not boot right now, and previously was experiencing odd graphical glitches during gameplay. It was pretty tough trying to get a photo of it, but I do have a video. As for repair, the game...

Definitely a crap-shoot but I am looking to buy the Namco Sys 12 board for Techno Drive. Looking for the A & B board Currently have one but it doesn't work, and I am having a lot of trouble searching for someone that can repair them since it needs the IO board attached in order to boot the game...

I fixed the issue. I learned from PinHP that he became aware of some hardware incompatibility on later revisions of the PiB3+. Now that I had an idea as to the issue, I did some searching and found this article: https://github.com/OP-TEE/optee_os/issues/6284 In it, the poster mentioned that...

I got a very odd issue. Just bought a Pi 3b+, and when I use the Naomi WiPi booter image on it the green LED light flashes 4 times slowly, then 7 times quickly and does not boot. I then tried to use regamebox and PinHP with my pi2Jamma, and it has the same issue. I tried to use recalbox through...

Ive been looking but cant find any. Tried looking up just sega blast city in japanese and cant find it, any advice on what to look up? Edit: scratch that, figured it out. Thank you!

I am in need of a blast city power supply, or someone who can repair them. I'm going to be slammed with work for the next couple of months and I'd like my cab back up and running as soon as I can so I won't have time to tinker with it. Just in need of the power board, but I'd be happy to buy...

Still ended up with a non-working PSU. It seemed to work for a second but now it is back to only powering up the monitor and nothing else. Does anyone have a recommended board repair person that I can pay and send this off to?

Cleaned and polished every contact with alcohol, then deoxit, and reflowed pretty much every pin connected to the 5V rail and still nothing. CRT powers up, my pi flashes the low power symbol, and the fan wont spin up on the psu. Im gonna go ahead and start putting the old caps back on one by one...

Tried repeating it a few times and I cleaned the pins with some alcohol. I saw an old post about cracked joints on the IO out so I will try that as well, but I'm not sure why it only stopped working now. As for the values, I am very confident they are correct. I triple checked to make sure the...

Seems like a bit of old flux. And I do not, but I can check again when I get home from work

Just checked with a multimeter, resistance does change pretty well as I turn the dial so I think it is fine

Forgot to mention! I did try the 5v adjustment pot, and it does not do anything, like at all. No matter which way I turn it, it stays steady.

Got an issue with my Blast City PSU. My Blast worked fine with every jamma game I tried on it, but I noticed the 5v rail was running a bit low at 4.4v when a game was plugged in. Tried out my naomi 2 and sure enough it wouldn't boot. I bought a cap kit, recapped it with no issues, and now it...

Got one!

Looking to buy a 001 loom for my Blast City, or any adapter that will help me power my Naomi 2 in it. I am willing to pay for expedited shipping as well

Thank you for the response! I think I can wait a bit for them to be repaired or for the other blasts to come in. Will you be getting any NUC, or NNC? I went ahead and sent over an email

Hey everyone, I am looking to buy a candy cab and am in the North Florida area. I am willing to drive 6 hours or more to pick one up. I was going to buy a Bass Fishing Blast City but the seller has disappeared on me. Let me know if any of you are willing to sell! I am preferring one in good...