Search results

Still have SIMMS for sale? Ty.

That is it, thanks! I knew it was some sort of JST connector but had no idea of the actual part number.

I'm Looking for either the 8 plug power connector for CN1 or a whole filter board to fix a broken off connector, does anyone have a good source for either of these? Thanks in advance!

Any idea why my horizontal hold would be hyper sensitive when connecting my netboot setup up to a CPS2 cab? When I take it off and reconnect the CPS2, it's fine. I've tried several other remote boards for the K7000 that's in it and they all are the same way.

A separate pc style psu.

I have a Naomi 2 with Capcom io in a pseudo big blue. It's just a standard 2 player, 6 button fighting cab that has/had CPS2 Xmen vs SF in it.

Any other tips to get the most out of a Naomi 2 netboot setup?

No problem! So to get multiple games working, I need the multi bios? Will that also mean that if I want to switch from a USA only rom to a Japan only rom that I'll still need to physically change dip switches on the Naomi?

Sorry, when I say the pi not working, I'm talking about the original pi I started with. I have two, one is the newer pi with wifi built in and the other is an older version 1 or 2 with an adafruit lcd. The older one is the one I coudn't get working at all.

Well, I followed the tutorial and double and triple checked it so I'm still not sure if it is the pi I was using or something else.

Well I made some progress. I used my newer pi that was built in wifi and loaded it with the piforce web v1.2 image. I was then finally able to load Mvc2 and play. I have some other roms such as Powerstone 2, Street Fighter Upper that I get error code 2 with but I assume it's because of the image...

Where can I change the gateway on my netdimm?

I have checked the piforcetools.py and it has these ips listed: ips = ["192.168.1.2", "192.168.1.3", "192.168.1.4", "192.168.1.5"] If I have the pi set to 192.168.1.2, I don't also want the Naomi set to that ip do I? Maybe I'm missing something, but how do I set the ip for the pi itself?

I bought the pi and adafruit lcd combo off a trusted friend that said it worked fine with his chihiro setup. He sent me the crossover cable and power supply for the pi as part of the package. It isn't the newest pi but he sold it because he had sold the cab. The cable is red and is labeled...

Where would I set the gateway? I've followed the tutorial and it only mentions the ip and net mask.

Well, I did that yesterday as well and also used the ping command and they still weren't seeing each other, unfortunately. I will have to try a different crossover cable next I suppose.

Am I missing a way to change or verify the IP on my pi? I copied Piforcetools over to the card and as far as I understand, it should default to 192.168.1.2, right? I set this IP up on the Naomi and didn't need to mess with the gateway as it was already set to 255.255.255.0. I can try a new...

I posted a thread about my problem but will also post here in case it helps someone else as well. I followed all of the instructions above for my netdimm, pi and Naomi 2 and still get an error 34. Now sure what's wrong, any suggestions? Thanks!

Hi, I have gone through the great tutorial for setting up a netdimm with pi and piforce tools and while I think I have everything setup properly, I am getting an error 34. I successfully changed the dimm network settings to ether, ip to 192.168.1.2, and left the mask at 255.255.255.0 and after...