Search results for query: *

It looks like the cd images are incorrect in some way but the DVDs are fine.

Can someone verify that the ELSA GPU verification is done in BIOS ?

My experience is that the SD to CF adapters do not work properly so try to get an original Sandisk 4GB or 8GB CF card. As for LEDs what about the Red one is it on constantly ?

On your CF adapter with the blue connector how do the LEDs behave ? edit: Which type of CF card did you use for the trimmed image ?

I like the Tigard due to the simple voltage level selector and support for UrJTAG.

@Parsec please do not ask about X3 issues in this X2 thread.

@magicman nice to see the WD worked, what cables and what settings did you have on the drive ? I.e. were they both MASTER ? Can you share a picture of your CF adapter ? And did you try with an 8GB CF card and a trimmed image ?

My cable has labels, BLUE is system, GREY is slave and BLACK is master. Set your CF interface to master and try that. As I also said, try truncating the image to 3 GiB and using a smaller CF card, 8 GB should work,

Blue connector should go into the motherboard.

The one with "3" connectors should have labels on it like MASTER and SLAVE.

@magicman just use a straight IDE cable and set the CF adapter to master. Some IDE cables have both a slave and master marking in that case choose master. Some are straight. The actual disk data is actually only 3GiB so you can truncate it and try a smaller card like an 8GiB.

I did a quick test with isobuster on "NM00031 SC31001-NA-DVD0-A (DVD-ROM).iso" and that is OK. Complete filesystem can be read.

What do you mean by extract the ISO ? I found the NM00009 game. @defor If I use isobuster on the file: NM00009 NPY1 CD0C (CD-ROM).iso, I do not find a file system. If I use the image from MAME all is good and I find: RB_ARC and the file: RBA.DAT Here is some technical differences between...

You should use FAT32, exFAT was only created to support files larger than 4 GiB and larger disks.

That game is a classic low quality Korean clone. The chips are Hyandai, the amp section has no heatsink.

Where did you preorder @alamone ?

@El_isra thank you for your hard work on this. Is there a place one can follow the development ? I would really like to use my sd2psx to play Gradius V but last time I checked it was not supported ?

You are on fire @alamone ,I guess you have seen the Konami announcement. https://www.konami.com/games/gradius/eu/en/ Now the question is, why no Gradius IV or V ?

2 diodes would drop the voltage to 3v6 which is within 10% of 3v3

Whoops, this is the best option but sadly out of stock. https://irkenlabs.com/product/jammafier/