Search results

Thanks. I guess I'll go and check the chassis that I've installed on cabs. maybe I'll find one that is similar to what you guys used. Just too much work to try and figure it out with these spares I have.

I have some MS9 chassis that have different neckboards. Can't find a D506, r517, so I thought it might be an older revision, but I can't find a J404 on it either! It's marked 05a00675c1. Is it possible to do these mods on this chassis? Also does anyone have photos of what the edge curling...

It's not a magnet issue. I tested the chassis on many Aero City cabinets and the problem remains.

I've had this chassis for a while now and I still have no idea what causes this issue. The thread title says it all: the left half of the screen is wider than the right half. Quite jarring in fighting games since p1 is bigger than p2, and spacing becomes different as soon as you cross the the...

Anyone have info on how to fix an MGCD that was burned out by flipping the connector? Or to reproduce the ROM Chips?

OP would you happen to know which chips are used for controls? I have an MGCD that does not respond to controls at all. Actually the video was completely blank too, but I removed the chip that does the timer overlay and I get the correct video output now.

Is it possible to do this 31khz mod on an MS8?

Didn't take a video because nothing shows up on screen. I can just hear the CRT picking up sync and losing sync over and over.

Yes, I swapped the cpu board to another system 12 and it works.

I have a Tekken Tag board that just keeps resetting itself. The cpu board works, but I recapped it anyway. Bottom board was also recapped and reflowed. Occasionally, the amount of time between resets will change, and sometimes the game will actually boot up, but it's so rare that it's just...

Definitely use GBSControl!

I have this Naomi and Capcom IO setup that I haven't used for a while now. When I tried it, the Naomi wouldn't power up. I swapped with another Capcom IO and it worked right away. Measured voltages on the output pins and I just get nothing from any pins. Any idea what went wrong with this IO?

Oh man I was hoping someone would do this! How do you hook this up? I have the Darksoft kit but I really hate using the LCD.

buffi, do you still have the sketch for this? I want to wire console sticks with this, too. The lack of autofire has really been putting me off from playing some games.

This happened to me too. Never solved the problem.

I also use that on one setup. It's just as good as the 7374!

Is the amp chip going to be a THS7375? I'm using a 7374 amp right now and while it's much better than without, I still think the output isn't high enough. Thinking of trying two 7374s in a row with pots, since I can't find any 7375 shipped quickly here.

An arduino pro micro is like $3.

Hasn't happened to me yet!

Daemonbite is fantastic. I use some on my PC - Jamma adapter as well. Zero delay is so bad in comparison.