Search results

Hello, I'm Sylver, 42 years old, software engineer and I have a strange hobby : repair old consoles :) I started with a lot of handheld consoles like Game Gear with a lot of leaking capacitor issues, sometimes it was just some broken screen issues, dead loudspeakers and so on ... Then I started...

Just a word to tell that I tried to use hot air station to install the 96 pins connector but it was hard (for me at least) to get the whole surface hot enough and get all the 96 pins correctly aligned to fit correctly ! Moreover even with everything around protected with kapton, you can't make...

Ok I tried to use one 4GB sd card I had in a new 2DS XL, copied few games, run the dot_clean script on the mounting point (after giving full disk access to the terminal elseway I had protection error as you guessed), and still had purple screen ! I found a 8GB card, I did format it using a...

Thanks for pointing this to me ! My SD card is indeed a XC card ! I've ordered a Sandisk 32GB micro SD (non XC) and I'll try to find a small MicroSD to make some tests ... Thanks for all the info, the multiCPS2 is really not tolerant ! I also have a Darksoft Multi AES with the same 64GB MicroSD...

Yes I kept the directory structure to have a games folder at root and I can view the list of games when using the buttons on the remote screen. But you are right, I have a Mac ... So I have some useless folders created on the SD Card ! I'll check that dot_clean thing that I didn't noticed...

My sd card is a Sandisk ! I did test the connection between multicps2 and b Board with a continuity tester, it should not be the problem ! For the installation part : BTW I did program the GAL16V myself, I did extract data from it to check and the program is ok, but I did test with the...

Ok thanks for the info ! The game was Super Street Fighter II: The New Challengers (Jap version) and it was working before trying to install the MultiCPS2 ! I use a Sandisk 64GB microSD card, FAT32 formated. Could it cause these kind of issue ? I can select the games with the included screen and...

Hello, I've just tried to install my multiCPS2 today on my revision 3 board and I have a purple screen after selecting a game and key writing ... I checked with an unencrypted game with same result ! As the board was working well few hours ago, I had to remove the battery and I shorted EXC5 (for...

Hello, is it possible to have the script also ? Thanks

Great info, thanks for posting this ! I have a rev 3 board and I though I would be stuck because of the lack of CN6 ! Thanks to your info I did order a DIN41612 with 96 pins straight to be able to connect the MultiCPS2 ! I think I'll use an air soldering gun to install the connector instead of...