Search results

Hey @Frank_fjs is a 3D design planed for the sync booster as well? and when we talk about 3D cases: a bit offtopic but do you have anything for your SNES2NEO adapters?

Cool, thanks! I've already done a stereo mod to my mv1c and feed stereo from a 3.5mm jack to eTims scart-adapter. Your version will simplify this setup :)

ahh wonderful! Since it's using the VGA-Port on the OSSC you should be able to connect a 3,5mm jack to the AV3 audio Jack on the OSSC from the supergun, right? Do you have a timeline for the release? It would fit perfectly in my setup :thumbsup:

I’ve edited my release post and added the needed hardware.

I’ll post a needed hardware list ASAP, need some sleep ;)

Should fit, I wasn’t able to test it, but only the one button changed afaik

Hey there, It's been some time since my last post about the case. It has taken some time to get the new revision but on friday it has finaly arrived. The main issues I had was the missing space for the nut in the front. Two small cutouts solved that problem: As you can see I have also added...

Yes, thats correct. I've edited my post and gut the corresponding pins on the connector ;)

You'll find pinout printed on the underside of the pcb. And if you want to start directly - look at the "SCHEMATIC_CONNECTORS.pdf" provided in the .zip Here are pictures of a finished cable: Quoting @acblunden2: American wring color scheme is: Ground = Black +5vdc = Red +12vdc = Yellow...

Hey, the 2nd revision case hasn't arrived yet, but I've taken the time to add the new switch cutout. Nothing major but here is the new revision^^ I've taken your measurements @Frank_fjs so when the new case fits the cutout should fit, too. I'll keep you updated :)

Hey there, here is the latest revision of the case: New are the cutouts for the screws in the sidepanels (to mount the Jamma Connector), the support for the front panel at the top and bottom and minor fixes with the mountingholes. I've just ordered one of these to see it in person and test...

@Misos thanks, it's 3mm plexiglass 49% translucent smokegray

It should be possible to 3d print some extension and glue it on the button or simply use switches with longer buttons. SInce the front is open you can reach the mono header and service and test Longer headers should also work or go back to the switch option. It's possible to reach the buttons...

@Frank_fjs the front plate has holes in it to be attached to the jamma edge but unfortunately I forgot to make cutouts for the nut in the sides. I've just added this in the last revision. I'll order another case for testing purpurses and after that I'll release the files. To act as a...

Hey Guys, I've started to "design" a plexiglas-case for the minigun a few days ago. Disclaimer: I've never done any case modelling or anything like that before. I've just barely managed to design that in Fusion360. Here are the results for the first prototype: This is designed specifically...

A User from the German forum „circuit-board“ had made this case for his MV1C and I just reordered it from the same place a year after that. It’s nowhere officially for sale.

Hey @Frank_fjs, I just want to say thank you for all your great work! I was able to consolize my MV1C this weekend and test it out with your awesome Superguns I've just finished last weekend! -kinox51