Search results for query: *

Why both? Do you plan on playing linked thru emulation? Seems complicated but I'm no expert. Do modern racing games support LAN? My advice would be to use one for 4:3 and the other for 16:9 if you're not linking. Playing 4:3 games on a 16:9 that already doesn't fit the cabinet will look...

Funnily enough, my shitty, small home town in South Dakota had a local pizza place with a small room in back with arcade cabs and one of them was In The Hunt. Really makes you wonder how many boards are in forever-storage or destroyed. They also had Cabal which is a surprisingly fun trackball...

I regret mentioning the CN connector for power because it's unnecessary for most applications. Just get a jamma harness and follow the pinout to supply 5v to it. You can grab unused 5v and Ground wires from your ATX power supply. One final note is that if you plan to play fighting games that use...

I/O needs 5v power; it won't get power through usb. You can either use the jamma edge connector or the little CN header on the opposite edge (I believe... definitely verify that claim). 99% of the time you'll just use the jamma edge since you need a jamma harness anyway.

Tie between The Getaway and Total Nuclear Annihilation.

Running an ES3 in the arcade I operate and sometimes it will crash to white screen. Restarting the game solves it. Doesn't happen often but often enough that it needs to be addressed. What are first steps? Thanks

The pixel refresh rate sucks. Noticeable ghosting on motion. That would be annoying on shmups but it's also subjective.

My fear is Arcooda won’t be able to meet demand in a timely matter.

It's inferior in every way to a tube, but if it's your only option, go for it. You will have fitment complications on a NC with curved bezel.

Upgrades: i7-2600 GTX 660 8 GB RAM 1 TB SSD Also includes a converted HDD with a standalone Ultra Street Fighter 4 (JVS). But you will need to at least revert the Multi BIOS settings and perhaps install the original GPU (included). $395 shipped conus. PP F&F.

https://irepairsega.com/

In the pics you'll see there is a pot for the 3.3v, but no pot for the 5v; just a resistor instead. I'm reading 4.7v but no way to adjust it on this. Has anyone installed a pot on this type of PSU?

Looking to identify this. Andamiro Pump It Up LX cab.

Positive feedback for DS is like giving positive feedback for Jesus after church, but I guess it doesn't hurt :D

HDMI and Component 1080i tested working. $350 or trade for interesting CRTs or arcade stuff. Sioux Falls, SD

In this order try: 1) Replace scsi cable to GDROM. 2) Check voltages (at the case) and/or replace power supply. 5.1v and 3.3v should be spot on. The "lid open" might be a catch-all error for the disc stopping spinning for whatever reason (power loss?) 3) Reseat all boards. 4) I'm a dummy and I...

$150 shipped in US paypal f&f

Sure. You just need to take off every zig.

FYI Someone reported on KLOV that new monitors now include the updated board.

Delete