Search results

Get a new chip and before do anything check the voltage . Some suppliers have verry old stock .check the region and revisions of your game . Take the rom from mame and copy to the new chip . Rest should should be fine :-)

Both run the video as it’s doubling the power . You can take out both boards put in a normal Naomi bios and see what is giving you the error and swap that pcb for a new version. Must be old revision if its the master or if its the slave it can be newer

All sold ! CLOSED

Exactly as @ShootTheCore is saying is verry intensive. I have special BGA tools to do this but this still requires me to do a lot of hand work . It’s doable but not at the rate a n2 is worth . The price to fix it almost hits the same as getting a working one of the shelf . Maybe in 5-10 years...

Yes it’s not even worth to repair . I did it a few times but the prices are to low to compare the time i need to reball it . @rfsup

Jvs card on its way out. These are prone to failure also Swap that card and I think will keep working

Reseat your cpu, only do it when the system have run for a while as the cooler stick to the cpu and will rip it out if to cold. Replace the paste and check the videocard

Yes 1 set left , pm me

Yes I’ve played games that needed that pack on the aleck so the aleck must hold more video mem

Looking good! I need a card pcb :-)

@darkgame i know you are new but please talk English. And also when pm me in English please and no asking for keys or hacks as that’s not the way to go here . Thank you

Im interested in 2 also

Hmm thats pretty cool. Time to hack the xbox one fight stick to fit the 2p panel and make it a mk11 cab

On my design is no cut out , so you can place it wherever you like :-)

@brizzo does your pcb fit the original aleck card plastic ? If so I will release the stl file for the outside

Awesome!

only you can use USA/Asia/Japan games no pall because of the 50hz. Also games with extension pack ar no problem for the aleck as it has it build in the system. So the only need is to make a n64 pinout adapter to a aleck card pinout . Something I made in the original topic . I just don’t have the...

I swapped a rom straight from the card to a socketed original aleck card and it works , only you can use USA/Asia/Japan games no pall because of the 50hz. Also games with extension pack ar no problem for the aleck as it has it build in the system. Only thing to watch is that some cards use a...

Should be doable :) I have the stl file ready for you for the casing if needed . @twistedsymphony , For other info, You can hook your n64 controller direct to the aleck if you take a n64 cable extender and cut of 1 end and connect it to the 3 wire plug on the system .

Nope no pcb design in here I think that already was open and shared in the other topic . There is not security issue on a aleck it’s all open . So the only thing in there was a stl that you don’t need. So no need for any of this for you :-)