Search results

  1. yombunker

    Sega Lindbergh high pitch squealing noise

    I hear that when i forget to plug the power to the graphics card. maybe your GPU is not getting the correct voltage sometimes and that's why it squeaks the GPU.
  2. yombunker

    Sega Race TV cabinet, no image

    I didn't tried different PSU as i can't find one that has the same pin configuration as mine (But, i did check with a multimeter that the voltages were correct, and they were). And i did remove the RAM and place it again, with no luck. But normally when the RAM is the issue in a normal computer...
  3. yombunker

    Sega Race TV cabinet, no image

    Ok, the GPU arrived and i swapped the GPU, and.... Nothing. i try doing the CMOS drain for like 30min and nothing as well. everything seems to be doing something, but, there's just no output. should i replace the mother board? or just not bother anymore and swap the whole Lindbergh case? Or just...
  4. yombunker

    Sega Race TV cabinet, no image

    haven't found an old computer that has an AGP slot, or a GPU with the AGP interface :( the other arcades i've that have a non PCB game their GPU uses PCIe I removed the GPU and the board did make a beep after a while, which means it's really trying to access it, so it shouldn't be the board i...
  5. yombunker

    Sega Race TV cabinet, no image

    It's a LCD monitor, and does turn on and says no signal. all the PCBs for the controls light up as well. But there's no game sound/video coming from the cabinet. I checked the PSU with a multimiter and i made sure the voltages were correct out of it. i tried booting the HDD on a normal computer...
  6. yombunker

    Sega Race TV cabinet, no image

    I bought a Sega Race TV cabinet and once i plugged it in, i have no image, nothing. no bios, no error code, zero. I tested the PSU and the voltages are fine, and HDD is spinning and i see lights on some PCI cards and the video card fans are spinning. Is this a common issue with this boxes? i've...
Back
Top