What's new
By:

SOLD .

Mark your items as sold
Put me down for at least 1 pair, probably 2. Curious how they end up looking with the powder coat.
 
That is absolutely a killer price. I've a few different methods and these things are time consuming! Heck, powder coat alone in CA these days is nearly $30/set these days.

People need to jump on this. Taito had stock and they were $XXX.

Congrats!
 
Ok, so I have two AWSD's and all of my brackets are in solid shape, but is there a chance of getting a couple pairs of these in chrome, or brushed metal with protective coat?

I've always felt the white was a little "meh" compared to say the NAC clips.

If not, perhaps I just get the new sets of these here, and either chrome or brush my existing ones?

Let me know what you think there @ImportantBet .
 
ImportantBet said:
It would have to be electroplated, which is something I can't do on my end.

If you want to chrome an existing one, auto shops know how to do this. Maybe ask a friend who works at one?
Click to expand...

Yeah, either chrome or brushed metal like the Vewlix Diamond control panel metal.

Well, in that case, put me in for 2 pairs, and I'll work with my current ones later on my personal project.
 
CHrome for those fellas likely would be around 40-80/pair maybe. Last I looked into it a number of years ago it was double the cost of powder coating at the shops around here.
 
Battlesmurf said:
CHrome for those fellas likely would be around 40-80/pair maybe. Last I looked into it a number of years ago it was double the cost of powder coating at the shops around here.
Click to expand...
I get it. I know they do a pretty decent chrome looking powdercoat these days.

I'll have to talk to my local peeps and see what I can find.
 
@ImportantBet - Any chance your crew may have thought about a repro of the acrylic marquee holder's metal bracket that attaches to the cab?

One of mine is missing one, so I thought I'd ask.
 
bagheera369 said:
@ImportantBet - Any chance your crew may have thought about a repro of the acrylic marquee holder's metal bracket that attaches to the cab?

One of mine is missing one, so I thought I'd ask.
Click to expand...
I think Alberto did for another member recently, and I have one set that isn’t painted just as well available
 
Dloop said:
I think Alberto did for another member recently, and I have one set that isn’t painted just as well available
Click to expand...

The instruction stand on that cab is one piece, or two pieces sandwiched like the Vewlix?

The one AWSD I have that has one, is just a single bracket with a 90deg bend in it, where the base is less wide than the part that mounts to the plexi.

If it's two pieces, then i'm missing part of one cab, and all of the others. :(
 
bagheera369 said:
The instruction stand on that cab is one piece, or two pieces sandwiched like the Vewlix?

The one AWSD I have that has one, is just a single bracket with a 90deg bend in it, where the base is less wide than the part that mounts to the plexi.

If it's two pieces, then i'm missing part of one cab, and all of the others. :(
Click to expand...
Its just one piece on egret 2s
 
I think I'll have to ping alberto on that, as I have some other stuff I think I'll need from him anyhow.

Thank you for the clarification.
 
You must log in or register to reply here.
Back
Top