FS 2x NES PPU

[ekorz]

I was surprised with the response to my last nintendo-related sale thread, so here we go. I have two NES PPU's pulled off boards myself. I thought I'd fried my first PPU when doing a NESRGB install, so I pulled these to troubleshoot. It turns out there was some other problem with my main board (the PPUs were fine). If anyone has a need for these, I can send them along for $10/each + shipping worldwide.

 

[ekorz]

One sold

 

[jassin000]

This is a great offer for thos who lack proper desolder tools.

You can simply snip the feet off your existing PPU and toss it in the trash.
Then heat and pull each pin nub individually from the hole with a pair of tweezers/forceps.
Once chopped pins are pulled, braid or wire wick (even more ghetto tech then braid) the remaining solder out of the holes.
After fully removed proceed with the RGB kit install as normal using the new PPU.

 

[skate323k137]

Or just spend 15 bucks on a velleman desoldering iron. They work like a charm.

Regardless, OP is good people, good luck on the sale.