400-5198-01x PSU

[erdrick1980]

I recently finished doing a capkit on this psu and have a couple of questions.
As I was doing the capkit, I noticed these resistors with rust. Should I replace them? And if I do what are they? What value?

And my last question.
Is this potentiometer some type of volume gain?

 

[djsheep]

Pot is for +5v adjustment.

Re: Resistors:

 

[erdrick1980]

Pot is for +5v adjustment.

Re: Resistors:

Thank you.

 

[zionfarm]

I recently finished doing a capkit on this psu and have a couple of questions.
As I was doing the capkit, I noticed these resistors with rust. Should I replace them? And if I do what are they? What value?

And my last question.
Is this potentiometer some type of volume gain?

Did you ever figure out the which resistor to get? I need the same ones for my PSU.

 

[Robertguy09]

Just reading the colors, it looks like:
470 Ohm 5% (r21)
2x 1000 ohm 5% (r17 and whatever is next to it)

I assume they are 1watt resistors.

 

[zionfarm]

This is my spare I got a recap for but noticed it needing some resistors.

 

[erdrick1980]

Did you ever figure out the which resistor to get? I need the same ones for my PSU.

Actually I didn't do anything, I just cleaned rust off and left it alone.

I can't believe i asked if that was a volume potentiometer in my previous posts. Lol