What's new
By:

48” OLED TV connecting modded consoles help!!

KinG_SoPa

KinG_SoPa

Grand Master
Joined
Aug 21, 2018
Messages
919
Reaction score
651
Location
Florida
Hello everyone,

Im looking for some advice.

I recently bought a LG 48” C1 tv. Im looking for help on connect all my retro console hdmi modded to it. Is there a hdmi splitter or something to connect them all to 1 hdmi?. I currently have a Van Crystal hdmi splitter but my issue with it is that the console images come out a bit blurry when hdmi is feeding through this van crystal splitter, VS when i connect the console straight to the tv is comes out clean image.

My current hdmi modded console are
- ps1
-nintendo
-dreamcast
-N64
-gamecube
 

Attachments

  • image.jpg
    image.jpg
    100.2 KB · Views: 73

Attachments

  • image.jpg
    image.jpg
    104.2 KB · Views: 83
  • image.jpg
    image.jpg
    105.2 KB · Views: 75
I am not - I use a receiver (Marantz) to do my HDMI switching. your switcher shouldn't be making the image soft - if its a decent switcher. Its just re-routing wires, not messing with the signal at all.
 
Please link the one your using so i can see it.

I will which some wires around and see if that fixes my issue. As i found this vancryst used online.

Thank you in advance for taking the time to help me :)
 
a while back, there was a fellow at the SHUMPS forum that was looking for an HDMI switch for his HDMI consoles 1080p and 4k 4:4:4: that did not add lag or degraded the picture. He tested a boat load. I purchased one that met 1080p requirements for $250 at that time because I was thinking the same line as you.. I head over there and see if you can find the tread.



https://shmups.system11.org/viewtopic.php?f=6&t=63585
 
Last edited:
Thank you both, i will check on the shumps site for more info.

And ill order one since they are cheap and see how it works. Thank you.
 
You must log in or register to reply here.
Back
Top