5Pin Interface for Samducksa(Crown) 303, 309 Joystick Lever

[Crown Arcade Shop]

The Samducksa lever uses the microswitch's FASTON 187 terminal, which may be inconvenient for users who are used to using Sanwa 5-pin joysticks.

5-pin bracket (in development) will allow existing 309 and 303 series joysticks to be fitted with a JST 5-pin cable without soldering.

By mounting the connector as shown in the photo, the overall thickness of the lever increases by less than 1.6 mm.

We are currently discussing the release time and price with Samducksa, and it will be released soon.

 

[xb74]

Looks great! Will be a popular item I believe and help a lot of folks out.

 

[nem]

That's brilliant.

 

[Crown Arcade Shop]

2nd Sample arrived today, and all the issue with the first sample have been resolved.

I'm ready for mass production.

 

[Crown Arcade Shop]

I Listed 5pin Interface Board for Samducksa 303/309 Joystick Lever on my online store.
This product is certified by Samducksa and have permission to use their logo.

https://bit.ly/3EgkAG8