ItsBobDudes
Grand Master
I need a little help to determine if I am doing any harm. I have a Netdimm setup in my Blast City on a Naomi 1 board. JVS power going into the Naomi board is 5.0V.
On the JAMMA edge going to the Capcom IO the 5V line is reading 5.2V on the multimeter. Am I at risk of blowing my Capcom IO ? If so how can I lower the voltage going into the JAMMA edge while keeping the JVS at 5V.
On the JAMMA edge going to the Capcom IO the 5V line is reading 5.2V on the multimeter. Am I at risk of blowing my Capcom IO ? If so how can I lower the voltage going into the JAMMA edge while keeping the JVS at 5V.