FS A-P JAMMA Extenders - Guaging interest

[obitus1990]

I have ordered all the parts to make myself a JAMMA extender set from the AP open source design, as well as enough parts to make 9 extras.

The only thing I think I will NOT include in the sell off of the extras would be the cables, as I get the impression that different people want different lengths of these. While 30 cm would seem to be adequate for me, and, pre-made versions of the cables in this length are readily available on eBay and Aliexpress, it may not be for someone else.

Black PCB, black IDC connector, translucent white ATX connector, black JAMMA card edge connector, 8 PCB feet included.

Is there any interest in this item offered in this format (w/o cables)?

 

[Rg111]

Nah, Id want cables, personally.

 

[KalessinDB]

Possibly interested, price dependent.

 

[PlayYing]

Id be happy with whatever size you make to make it cost effective. Im in for two

 

[obitus1990]

I'm thinking $60/set including shipping to anywhere in the US via USPS priority mail (no cables). I had considered ordering the 30 cm ATX extender cables on Aliexpess (that the project's creator linked to in his thread) at a QTY of 10, but, that would drive the cost up quite a bit, as each one was $17 including shipping per unit. When I added 10 of these to my cart, the shipping alone was $96 USD, on top of the $6.50 each per unit, for a whopping $161 or so just for the ATX extender cables. If we were talking $20 shipping, it's a no-brainer, but $96, no way.

It'll be a month before all this stuff arrives anyway, so, I can contemplate whether I want to make cables or not. I already have 34 pin IDC cables and connectors to crimp to it (rainbow colored), so that's not an issue, but, I would have to get the molex connectors, crimp pins, and wire to make the ATX extensions.