A68KSA30X and MS9

[JohnRambo'sKnife]

Thank you. Gap can likely be masked with some closed cell foam, but I will source proper MS9 instead.

 

[m-ramone]

Great,was also looking for this info
Can i just plug it into the standart Astro City power supply or some modifications needed?

 

[Mukuro_W]

No mod needed since this tube is drived by the nanao ms9, so it will use same amp up connector for rgb, AC input and degauss.

 

[darksofter]

I found this in my candy cab A68LFP227X.
My goal is to pair it with a nanao chassis and eventually mod it to a 31khz monitor.

 

[Viku]

Finally found the correct connector for the vertical wires today. Grabbed one of my spare MS9-29 chassis, triple checked everything and .... it works.

Colors need adjusting etc, but I'd say this was a success.

Hi! Where did you find the conector for the vertical wires? I have the sale problem on one hitachi