What's new
By:

Arcade PCB 3D Printed Cases!

R

Robertguy09

Grand Master
Joined
Nov 5, 2021
Messages
409
Reaction score
793
Location
Texas, USA
I plan to model and 3d print cases for some of my PCBs.

If you want me to print you a case, PM me for cost. 😁

Here are the ones I have complete so far!

Printables Link​
Images​
tetris_2_plus_topview.webp
top.webp
Thunder Force AC PCB Case
thunder_force_ac_case.webp
Seibu SPI V2.1 Case
spi_v2-1_case.webp
Gunbird PCB Case
gunbird_case.webp
Seta Aleck 64 PCB Case
seta_aleck_64.webp
Truxton PCB Case
truxton_case.webp
Tetris The Grand Master 2 Plus PCB Case
sh2_ps5_tgm2.webp
Samurai Aces PCB Case
samurai_aces_case.webp
Namco System 1 Multi PCB Case
namco_system_1_top.webp
Chain Reaction PCB Case (Magical Drop 1)
chain_reaction_case.webp
Tekken Tag Tournament PCB Case
Namco System 12 PCB Case (no logo)
namco_system_12_ttt_case.webp
Aqua Rush PCB Case
namco_system_12_aqua_rush_case.webp
Puyo Puyo 2 PCB Case

Sega System C2 Case (No Logo)

puyo_puyo_2_case.webp

Tetris The Grand Master PCB Case

Capcom Sony ZN-2 Case (No Logo)

tgm_case.webp


WIP / Future Case plans.
Order will likely change based on commissioned asks and my wants. :)
  1. G-Net Split case (for smaller printers)
  2. CPS1 Multi (Probably generic case too)
  3. Psikyo SH2 games (generic and specific game logo designs)
  4. Konami TMNT based PCB (TMNT, Aliens and generic)
  5. Konami TMNT2 based PCB (TMNT-turtles in time, Sunset Riders and generic)
  6. Raiden 1
  7. Raiden 2 and DX
  8. IREM M92 (In the Hunt, Gunforce1/2, R-Type Leo, generic)
  9. IREM M90 (Bomberman / Atomic Punk / Dynablaster and generic)
  10. IREM M97 (Bomber Man World / Atomic Punk 2 / New Dyna Blaster Global Quest / New Atomic Punk Global Quest
    1992 and generic)
  11. Namco system 11 (soul edge, Tekken 1/2 and generic)
  12. CPS2 repro cases
 
Last edited:
plasticfactory said:
That looks great, I'll definitely make one! How do you like your XL? I have been really happy with mine.
Click to expand...

Overall I have loved mine! I really love how I can mix material types. Add some TPU for a flexible joint or a softer surface. Or Mix PLA + TPU for easy to remove supports! :)

I had my first big problem while printing this though. I got an heater overcurrent and then a preheating error. Ultimately it ended up just being one of the heaters died. I measure it and its just an open circuit. Still waiting for the replacement to come in, hopefully its the only problem.
 
plasticfactory said:
That looks great, I'll definitely make one! How do you like your XL? I have been really happy with mine.
Click to expand...

I think we talked about this a while back, but was support for multiple nozzle sizes ever implemented into the XL?

I'm still fairly tempted by the XL... I'll probably finally bite the bullet on that if/when they release an updated "S" model or XL2.
 
Zepherino said:
I think we talked about this a while back, but was support for multiple nozzle sizes ever implemented into the XL?

I'm still fairly tempted by the XL... I'll probably finally bite the bullet on that if/when they release an updated "S" model or XL2.
Click to expand...
Last time I checked they still didn't support multiple nozzle sizes. Definitely a feature I want too.
 
This is a nice idea/solution!

A) for some reason i want to buy a Tetris Plus 2 PCB now
B) sadly i dont own a large printer :( - But your solutions gives me an idea of working on some cases (maybe never...) by myself. - I always thought of printing like acryl plates version and not as a case! Thanks a lot for that nice idea!

Update:

Because of this i bought a new larger 3D printer *facepalm*

Looking forward for your G-Net version :)
 
Last edited:
Orakelschaf said:
This is a nice idea/solution!

A) for some reason i want to buy a Tetris Plus 2 PCB now
B) sadly i dont own a large printer :(- But your solutions gives me an idea of working on some cases (maybe never...) by myself. - I always thought of printing like acryl plates version and not as a case! Thanks a lot for that nice idea!

Update:

Because of this i bought a new larger 3D printer *facepalm*

Looking forward for your G-Net version :)
Click to expand...
Thank you!
And I'm happy to have helped you make poor purchase decisions 🤣😂

I actually made acrylic cases for ~2/3 of my cases. Overall I'm happy with them, but bc I didn't have a CNC or something to cut them there's a lot of imperfection.
See them here:

https://www.arcade-projects.com/threads/acrylic-cases-for-my-pcbs.24626/


I'll probably remake most of not all of my smaller PCB, but leave the larger ones as is. I've had my XL for almost a year now and this project has been on my the back of my mind since then.
 
I dislike the idea of cutting acryl by hand. - Thought of buying a laser, but CO2 lasers (if you want to cut clear acryl) are way too expensive.

I thought of buying a cheap laser and cut black acryl ... but meh

I thought of outsourcing, but depending on size and engraving it is something from 30 to 150 USD - for one "case". Went fast "nah" on that idea.

As i was trying to figure how to cut acryl it crossed my mind to simply do it by 3d printing, but was always "pcbs too large for my 3d printer" - It never crossed my mind to simpl buy a larger printer *facepalm

... thanks again for sharing :)
 
Zepherino said:
I think we talked about this a while back, but was support for multiple nozzle sizes ever implemented into the XL?

I'm still fairly tempted by the XL... I'll probably finally bite the bullet on that if/when they release an updated "S" model or XL2.
Click to expand...

Unfortunately no, it still doesn't support multiple nozzle sizes. That was a dealbreaker at the time for me, but I am extremely happy I kept my preorder open. This printer is seriously fantastic.

As an example, I make divider containers for tradeshow part sample kits. I do 3 different colors, and 2 additional materials, and make 4 at at time. The thing never skips a beat.
 
Oh! This already looks nice!
  • Why is there a corner in the upper right, but not on the upper left? :)
  • Make holes/openings for the heat spreader on the bottom left
  • Make an extension/hole for the volume knob
  • How to you connect upper and lower body? heat inserts? (maybe make some standoff feets
  • Mabe the dip switches (lower bottom) should be reachable (not sure if any of those were important, have to look it up)
  • Be aware that not everybody has multi color large format printers or want to print multicolor (i dont mind your design, i ll just print without the logo on top and add a logo with vinyl/sticker paper later)
  • How long did the print take? :)
 
Thanks for your input @Orakelschaf !

Waiting on some test prints to finalize this, but I'm getting closer. :)

1734292148671.png

Orakelschaf said:
  • Why is there a corner in the upper right, but not on the upper left? :)
Click to expand...

I thought about just making it a square/rectangle, but decided to mix it up and just follow the layout of the gnet PCBs.
Orakelschaf said:
  • Make holes/openings for the heat spreader on the bottom left
Click to expand...
Could you elaborate what you mean?
When I printed the above pictures, I was using 0% infill and a few other settings just to make it print faster. Not sure if that worsen the lifting or not.

Orakelschaf said:
  • Make an extension/hole for the volume knob
Click to expand...
Was already planning to :) Just didn't include it in the test print to save on material

Orakelschaf said:
  • How to you connect upper and lower body? heat inserts? (maybe make some standoff feets
Click to expand...
I'm designing with heat inserts being required. Standoff already already designed in too :)
1734292460180.png
1734292853335.png


Orakelschaf said:
  • Mabe the dip switches (lower bottom) should be reachable (not sure if any of those were important, have to look it up)
Click to expand...
I'm going to leave a large opening for the card to slide out. The dip switches will be accessible from there.

Orakelschaf said:
  • Be aware that not everybody has multi color large format printers or want to print multicolor (i dont mind your design, i ll just print without the logo on top and add a logo with vinyl/sticker paper later)
  • How long did the print take? :)
Click to expand...

I considered designing for my mk3s+ before getting my XL. I just didn't like all the seams that would be required. If enough actually want it, I might consider doing it.
Print time TDB once I'm done :)
 
This is really awesome!

Getting my printer (Neptune 4 Max) today and will be ready to print the cases (and maybe help with prototyping) somewhen this week (still have to find a place for the printer) and i am really looking forward printing cases for my pcbs :)

Robertguy09 said:
I thought about just making it a square/rectangle, but decided to mix it up and just follow the layout of the gnet PCBs.
Click to expand...

It feels like a strange decission, since i would always make square cases, but i don't mind either. Go for it :)

Robertguy09 said:
Could you elaborate what you mean?
Click to expand...

On the bottom left of the pcb there is a silver metal piece. That heat sink is collecting heat and can heat up (how much = i don't know) - This always should be ventilated and/or not to close to the plastic ( i think a lot of people will print in PLA). Not sure if this causes any trouble at all, but it is something you always should keep in mind :) - I think that is the reason why some enclosures (f.e. lion3 cps1 case) has an additional fan

Robertguy09 said:
I considered designing for my mk3s+ before getting my XL. I just didn't like all the seams that would be required. If enough actually want it, I might consider doing it.
Print time TDB once I'm done
Click to expand...
Oh! Don't mind small printers, this designs really only work on large bed printers. I meant "single color" vs "multi color" prints - Just design it that i always can choose not to print a logo :)

I think i will print a logo on vinyl/sticker paper and use the logo area for that :)

Do you design with fusion360? - Did you think of doing a parametric design for "normal pcbs" (which only differ in size and where the screw holes are)
 
Orakelschaf said:
Do you design with fusion360? - Did you think of doing a parametric design for "normal pcbs" (which only differ in size and where the screw holes are)
Click to expand...
Yep I use fusion360. I get the idea of parametric designs, but haven't tried to design any yet. One of these days I'll get around to watching some tutorials or something on it.
 
Robertguy09 said:
One of these days I'll get around to watching some tutorials or something on it.
Click to expand...
It is really easy - There is a menu where you can enter parameters (by variablename) and even formulas. Those parameters can be entered on "everything" like sizes. What makes it even more interesting that those parameters can be entered on repeatable stuff. It is kinda "easy" - After some videos you will get the idea pretty fast.

Really looking forward to your g-net case (but take your time) - will be one of the first larger prints on my new printer
 
Last edited:
You must log in or register to reply here.
Back
Top