Blast City / Astro City / Astro City 2 / NNC - Restorations

Had a hard time getting that little clip back in as my coin mech fell apart a few weeks ago. Got it back in and wired up and dropped in a 100 yen coin and it registered! Big win for me since it’s hard to reinstall the thing and get the nuts on the short screws then wasn’t sure how to wire at first was gonna use an adapter but then realized I could just use the spade connectors on the mech rather than through the connector that was attached to it.

Unfortunately the slot seems too narrow and bent so I had to really force the coin through.

Love getting these small details handled.


IMG_0038.jpeg


IMG_0039.jpeg
 
I think this is m4/m5 8mm but I can’t find em online. Three were used to screw this panel in place with another three different bolts. These look like the same screws within the cabinet such as holding down ground wires.

Any ideas of where to find em?

I went through all the bags of spare arcade screws I had.
 

Attachments

  • IMG_0103.jpeg
    IMG_0103.jpeg
    218.5 KB · Views: 2
  • IMG_0104.jpeg
    IMG_0104.jpeg
    233.2 KB · Views: 2
  • IMG_0106.jpeg
    IMG_0106.jpeg
    223.5 KB · Views: 2
  • IMG_0105.jpeg
    IMG_0105.jpeg
    219.3 KB · Views: 2
  • IMG_0108.jpeg
    IMG_0108.jpeg
    205.4 KB · Views: 2
Back
Top