Blazblue CF multi I/O error

[Miky]

On the Taito X2 multi i attempted to boot up Blazblue Central Fiction on the frontend and got met with an I/O error. This applies to the other Blazblue games as well, i looked through this topic in other boards and i hear removing "iDmac controller card" fixed it? I don't know where within the taito the card is. Any advice?

 

[nem]

Likely BlazBlue just doesn't work with the Capcom IO.

 

[Miky]

Likely BlazBlue just doesn't work with the Capcom IO.

Thank you. I figured it out. I need a fast i/o for the Nesica titles.

 

[nem]

Well no, you don't need Fast IO for Nesica titles. JVS is fine. A Taito Vewlix JVS IO will be the most compatible, but a Sega one should be fine too.

 

[Miky]

Well no, you don't need Fast IO for Nesica titles. JVS is fine. A Taito Vewlix JVS IO will be the most compatible, but a Sega one should be fine too.

I have a sega and capcom I/O board and i tested both. The system said i/o errors. Both are jvs so im at a loss aside from getting a fast board

 

[kazuo]

Likely BlazBlue just doesn't work with the Capcom IO.

Works fine for me with Capcom I/O (CT, CS,/2). Never tried the Nesica titles but I can't imagine they wouldn't work with Fast I/O emulation/RFID enabled. I can try tomorrow I guess and report back.

 

[Miky]

Yeah. It's strange in the images are the capcom boards. The only Blazblue game that works with the JVS is Continuum Shift as it wasn't in the Nesica loader.

 

[djsheep]

What version of the X2 Multi are you using? I had a older version and faced similar issues, and fixed it by upgrading to the latest.

 

[Miky]

What version of the X2 Multi are you using? I had a older version and faced similar issues, and fixed it by upgrading to the latest.

Multi version 2.0