Bloody Roar 3 - Image issues

[ViniciusMG13]

Good morning everyone!

I'm using a Namco System 246 chassis B. I burned the CD at 9x. It boots without any problems, but with image issues. Does anyone know what could be causing this? T It only happened in this game.

Thank you!

 

[Franco23444]

Looks like a sync issue, the system uses C sync so check your wiring and also check that the PS AV cable is connected properly in the system

 

[ViniciusMG13]

oks like a sync issue, the system uses C sync so check your wiring and also check that the PS AV cable is connected properly in the syst

I have already changed the IO board and changed all the cables and the problem persists.

 

[Franco23444]

I have already changed the IO board and changed all the cables and the problem persists.

Try without the I/O, you can bypass the I/O and plug the monitor directly to the system to see if that changes anything

 

[nem]

Bloody Roar 3 only outputs 480i unlike most or all other 2x6 games that do 480p.