We need to get a dump of that Cutey Fatty gameFound this link with a lot of info about Crystal System and EVOGA: https://www-culturaneogeo-com.trans...uto&_x_tr_tl=en&_x_tr_hl=en-US&_x_tr_pto=wapp

We need to get a dump of that Cutey Fatty gameFound this link with a lot of info about Crystal System and EVOGA: https://www-culturaneogeo-com.trans...uto&_x_tr_tl=en&_x_tr_hl=en-US&_x_tr_pto=wapp

I just got one of these PCBs. I need this multi in my life!Project Update!
Been busy the past couple weeks, but I found the time to get the microcontroller soldered and ported the pc host / flash programming code to this design.
In the photos you see a mess of wires. Two wires were to fix a small oversight (leaving FLASH /RST signal floating during programming, connect to cart edge normally, and connecting an output signal to an input only pin on the cpld). The other four wires were to allow the microcontroller access to the cpld jtag port.
That means the software can now update the CPLD logic over USB, so in the future if we find additional games of unknown sizes it will be simple to change the dip switch banking/mapping to support different rom sizes. I'm excited about this!
I'm also happy with the DIP switch that I selected. The switches can easily be adjusted with finger nails and have a tactile feel and snap into position when pushed.
Overall the hardware design is finished, just need to make a few small changes to the pcb design and send it for final fabrication. Software is 85% done, just need to design a simple to understand method for managing rom slots.
Pre-orders?
I believe the market for this multi cart is rather small. I don't like to do pre-orders, but in this case to manage risk I would like to do a small round of pre-orders.
At this point the cover my costs retail price will be $250 USD, for those who jump on early I will give a discount for their support.
Send me a PM if you would like to pre-order; Expecting to have ready to ship middle of August or sooner.
![]()
hi : darksoft / brizzoI just got one of these PCBs. I need this multi in my life!
Okay deal@brizzo another run?
X1.
Talk to @Mitsurugi-w and he'll assemble them directly in USA. That's an option, I hope.Okay deal
But we're going to have to wait on this 35% tariff on specific goods sold from Canada to the USA.
I'm in EU so not problem for me ! I'm interested for a Multi pleaseOkay deal
But we're going to have to wait on this 35% tariff on specific goods sold from Canada to the USA.
Excellent! Looking forward to it!Okay deal
But we're going to have to wait on this 35% tariff on specific goods sold from Canada to the USA.
Hey, I've messaged you a bunch of times about the one I bought not working, can you please reply?Okay deal
But we're going to have to wait on this 35% tariff on specific goods sold from Canada to the USA.
you have an issue with Multi ? others that have buy it work fine for them ?Hey, I've messaged you a bunch of times about the one I bought not working, can you please reply?
Yes, mine does not work properly, but of all the buyers I don't think anyone else has an issue so it's likely very isolated.you have an issue with Multi ? others that have buy it work fine for them ?