net_terminal_gene
Beginner
Hi there. I have a Blast City cabinet that came with a reverse mounted Toshiba A68KJU96X tube with a non working MS2930 that automatically goes into protection mode. The chassis was sent back to seller which was then sent to PNL.
I recently ran across this AO WiKi , where it makes it seem like out of all the MS29XX series, the A68KJU96X is only compatible with MS2932. Is this true?
I’d rather find a chassis than tube if that’s the case. I’m looking for some insight on determining my next steps.
a. Continue trying to fix the MS2930 because it will work.
b. Find a MS9-29 + Yoke
I’m totally fine with 15khz running through this cabinet if MS9 is my only option. I have an AC and NAC both with MS9-29 + A68KJU96X that I plan on doing the Moffitt 31khz upgrade.
Any help would be much appreciated. Thanks.
I recently ran across this AO WiKi , where it makes it seem like out of all the MS29XX series, the A68KJU96X is only compatible with MS2932. Is this true?
Known tubes:
Toshiba A68KJU96X / MS2932 : H :0.4 Ohms V:7 Ohms
Toshiba A68LBT696X / MS2931 : H :0.9 Ohms V :6.8 Ohms
Toshiba A68KZN696X / MS2930 : H :0.5 Ohms V:6.7 Ohms
I’d rather find a chassis than tube if that’s the case. I’m looking for some insight on determining my next steps.
a. Continue trying to fix the MS2930 because it will work.
b. Find a MS9-29 + Yoke
I’m totally fine with 15khz running through this cabinet if MS9 is my only option. I have an AC and NAC both with MS9-29 + A68KJU96X that I plan on doing the Moffitt 31khz upgrade.
Any help would be much appreciated. Thanks.