Candy Cab Panels – High-Quality Astro City Panels (Special Offer Inside)

[elite789]

That's the OG panel design for sure.

https://gamesx.com/wiki/doku.php?id=arcade:joystick_mounts

They've got a 95mm spacing on the two M4 holes, and are designed with a bent plate in mind. These panels used an LS-32 as standard, but Seimitsu doesn't make these plates anymore. Sanwa still does, I think - the JLF-P-1S. I made some 3D printable ones:

https://nfggames.com/forum2/index.php?topic=7310.0

It was one of the first things I ever designed so they might need an overhaul, but they work.

Thanks for the info.

Looks like the following sticks would fit perfectly :
JLF-TP-8S
JLX2-TP-8S

But indeed the LS-32-01-SS would not fit, looks like that S plate is too short, and I need LS-32s for a future shmup-dedicated NAC.

 

[NFGx]

The plate included with a new LS-32 won't fit, that's right. The LS-32 itself will, just about _any_ stick will fit, including the LS-32, if that panel is made to the original spec. You just need the appropriate plate. The 95mm mount spacing is not used anymore so you'll need to find, make, or print a plate that works.

So honestly I wouldn't worry about the plate, 3D printed plates are more than up to the job.