bgwelistyl
Professional
Hi, does anybody know where I can purchase the joystick mounts for a CPS2 Big Blue panel? The recessed area in the picture seems to measure 5.5 x 4.75 inches
Capcom Big Blue Joystick mounts?
- Thread starter bgwelistyl
- Start date
CamoYoshi
Professional
I am also looking for these - Going to see if I can have them made by SendCutSend.
bgwelistyl
Professional
thats what i ended up doing.
You could also use the Universal Adapter Plate from Paradise:
https://paradisearcadeshop.com/products/universal-arcade-joystick-adapter-plate
https://paradisearcadeshop.com/products/universal-arcade-joystick-adapter-plate
CamoYoshi
Professional
Do you happen to have the file? Mind sharing it?
Does this fit the cutout in the control panel? Any modifications needed?
Yup, it should fit in the cutout. No mods needed as far as I know. But you can always ping Paradise and ask them what the dimensions are. I'm just pointing out they are Universal plates that are available, the rest is up to you.
CamoYoshi
Professional
Looking at it more closely, the universal mounting plate is too small. I am trying to mount the same joysticks as bgwelistyl (IL sticks?) and those universal plates do not line up with the holes in the control panel already present, so unfortunately I don't think it will work for what I need.Yup, it should fit in the cutout. No mods needed as far as I know. But you can always ping Paradise and ask them what the dimensions are. I'm just pointing out they are Universal plates that are available, the rest is up to you.
There is an IL version too, not sure if that would work.
https://paradisearcadeshop.com/products/universal-il-adapter-plate
But tbh, I would probably send a message to them through their contact page and see if you can get the dimensions of these plates. Better than speculating from pictures, yeah?
CamoYoshi
Professional
I have sent a message but also just trying to do my own detective work as well. Thanks.
CamoYoshi
Professional
Per Paradise Arcade Shop, the dimensions of the universal plate are 3.3125" x 3.75" - Too small for what is needed for the Big Blue control panel. The Big Blue needs closer to 5.5" by 4.88".