Casing the multi & extending the lcd

[Kagaden]

Hello,

I was curious if anyone knew the part number for the lcd connector so I can purchase a longer one. As well as any quick walkthrough on recasing the multi.

Thanks
K

 

[Kagaden]

Nevermind... found here:

LCD Extender:
https://paradisearcadeshop.com/multi-pcbs/1653-darksoft-cps2-extension-cable.html


Recasing:

FrancoB wrote:
For those wondering which pillar needs removing in the case, its this one:

It needs enough material removing so it's almost flush with the case:

I cut off about half of it with some sharp side cutters and then removed the rest with a Dremel.

 

[aoiddr]

Alternately, you could just shave off just half of the post instead of removing the whole thing.

 

[Kagaden]

Interesting, I'll be trying this soon