Hi all,
You may have seen my other threads about being scammed on an OR2 cab that came with 15/24k monitors not the standard 31k monitors. Anyway I thought fine I will just use my 8100 VGA to cga converter which works a treat on my pc, however it doesn't like Chihiro input I think this because the chihiro outputs a horizontal sync only and perhaps a composite sync on green.
I'm thinking there are 2 possible solutions could I use a lm1881 or EL4583 to separate the sync into h and v that the converter board might like better.
Or
Thanks all
Steve
You may have seen my other threads about being scammed on an OR2 cab that came with 15/24k monitors not the standard 31k monitors. Anyway I thought fine I will just use my 8100 VGA to cga converter which works a treat on my pc, however it doesn't like Chihiro input I think this because the chihiro outputs a horizontal sync only and perhaps a composite sync on green.
I'm thinking there are 2 possible solutions could I use a lm1881 or EL4583 to separate the sync into h and v that the converter board might like better.
Or
- Use the 15khz output from the Xbox av port directly while tricking the game thinking it's still 31khz.
Thanks all
Steve