Hi guys sorry to bother everyone if a thread exist about this topic. I bought a Taito Type x3 and a Fast I/O board and I can find any way to connect this. What cable do I need ? Where can I buy those ? Please Help and Thanks.
connection Fast IO and nessica card reader to Taito Type x3
- Thread starter Vjg1588
- Start date
PascalP
Legendary
Standard UTP cable. Any Cat5/5e will do 
And you can register to Nesica :
https://nesica.net/regist
1. Enter mail address and receive a confirmation
2. Choose a nickname (at least 8 char long), password twice (at least 8 char long with uppercase and number), prefecture in Japan and valid, then add your Nesica card number you've already played at least once and valid.
https://nesica.net/regist
1. Enter mail address and receive a confirmation
2. Choose a nickname (at least 8 char long), password twice (at least 8 char long with uppercase and number), prefecture in Japan and valid, then add your Nesica card number you've already played at least once and valid.
How can I connect the controllers to the fast I/O ? I have a jamma cabinetStandard UTP cable. Any Cat5/5e will do
. I'm really lost . thanks for the help.If you have a Fastio AMP, rely it to Jamma directly and connect the cable to TX3 unit in Fastio main port.How can I connect the controllers to the fast I/O ? I have a jamma cabinetStandard UTP cable. Any Cat5/5e will do
PascalP
Legendary
Which Fast IO board do you have?
There are 3 different versions as far as I know.
1. Original Vewlix Fast IO PCB
2. Universal Fast IO PCB
3. Jamma/Fast IO PCB
Nr. 1 & 2 only have the black 60pin connector for input and would require you to crimp a harness which plugs into your cab
Nr. 3 can easily be connected to Jamma inputs and has Fast IO output then
but as you mention you have a Jamma cab, which one? Which monitor? As TTX3 does NOT output low res 15KHz video
There are 3 different versions as far as I know.
1. Original Vewlix Fast IO PCB
2. Universal Fast IO PCB
3. Jamma/Fast IO PCB
Nr. 1 & 2 only have the black 60pin connector for input and would require you to crimp a harness which plugs into your cab
Nr. 3 can easily be connected to Jamma inputs and has Fast IO output then
but as you mention you have a Jamma cab, which one? Which monitor? As TTX3 does NOT output low res 15KHz video
Hey , I finally got everything I just need to know what can I use to connect the Fast I/O to a jamma cabinet if it is possible .
This is the Fast I/O that I got With a Taito type 3:
https://www.ebay.com/itm/Taito-Fast...853710?hash=item3668e1aa8e:g:KgwAAOSwmMBe4nx2
This is the jamma connector inside the cabinet:
Thanks for your help.
PascalP
Legendary
It is possible, just need to built a harness now.
You can create your own with a Jamma fingerboard going into a 60pin JST header etc.
just look up a Jamma pinout and a Taito Vewlix cab pinout for the Fast IO board
You can create your own with a Jamma fingerboard going into a 60pin JST header etc.
just look up a Jamma pinout and a Taito Vewlix cab pinout for the Fast IO board